Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Stanton, CA | Iron Beam Contractors
We provide independent CGI cabinetry and countertop installation, refacing, and full-kitchen construction across Stanton’s 90680 small-lot tracts. The one thing that makes our CGI work here different is sequencing: Stanton’s building division runs plan check in-house, not through Orange County, so the 100-amp-to-200-amp panel upgrade on these 1950s homes has to clear before the cabinet rough passes. That’s a Stanton-specific bottleneck we plan around from day one. Call (833) 756-5936 for a free estimate on CGI kitchens, baths, or garage-to-ADU conversions.
Why Stanton Residents Choose Us for CGI Service
We’ve spent years installing and renovating CGI Euro-style slab-door cabinets, shaker and raised-panel lines, quartz and granite countertops, and frameless vanity series across Orange County’s small-lot infill tracts. We’re an independent construction firm, not a dealer and not factory-authorized, which means our only obligation is to the homeowner in front of us. If a CGI box is sound but a hinge failed, we say so. If the carcass has swollen from slab moisture or the run is out of square with a 1950s wall that’s settled, we tell you that too, because Nolan Driscoll built this company on telling the homeowner exactly what’s in the wall before we open it, not after. Our crews work to CGI’s published installation specs on every Stanton General Contractor tear-down, addition, and ADU conversion we take on, and we coordinate panel upgrades, plumbing, and cabinet set under one contract so the permit doesn’t stall mid-project.
Styles & brands we work with
Common CGI Construction Problems We Solve in Stanton
- Racked frameless boxes on settled 1950s framing. Stanton’s post-war tract walls have decades of settling in them. CGI Euro-style slab-door boxes installed plumb on studs that aren’t plumb end up with doors that rack, reveal lines that drift, and hinges that won’t hold adjustment. We shim the box back to true before the countertop ever goes on, which is the only fix that lasts.
- Swollen cabinet bottoms on wet garage-conversion slabs. Original single-car garages turned into ADU kitchens put CGI toe kicks and lower boxes tight against concrete that wicks moisture. MDF and particleboard bottoms swell, finish delaminates, and the box fails from the floor up. We set base cabinets on a sealed sleeper and moisture barrier wherever the slab reads damp.
- Finish checking and fade on south- and west-facing kitchen walls. Stanton sits inland in the coastal-adjacent basin, and the summer sun through original single-pane slider glass is brutal. Painted and thermofoil CGI door fronts on west-facing walls take direct exposure through Santa Ana wind seasons, and we regularly see checking and color fade that could have been mitigated with the right glazing or finish selection at install.
- Undersized panels stalling the cabinet rough. Many of these homes still carry 100-amp panels that can’t carry a new CGI kitchen with island, dishwasher, and disposal circuits. The upgrade has to precede cabinet set or the permit stalls. This is the single most common sequencing problem we see in 90680, and we handle it as part of the scope instead of discovering it mid-job.
- Moisture under bath vanities on original slab floors. Stanton’s older bath floors often sit directly on slab with no vapor control, and frameless CGI vanities pick up the same wicking problem as kitchen boxes in garage conversions. We address the slab condition before set, because swapping the vanity after the fact doesn’t fix the moisture source.
CGI Service in Stanton: What Local Conditions Mean for Your Equipment
Stanton’s building division handles plan check in-house rather than routing through Orange County, and that single fact changes how every CGI in Cypress cabinet run gets permitted and sequenced here. A garage-to-ADU or addition permit with CGI cabinetry in the scope moves on Stanton’s own review calendar, and the inspectors here want the 100-amp-to-200-amp panel upgrade signed off before they’ll pass the rough for the new kitchen circuits. There’s no shortcutting that sequence. Nolan Driscoll grew up in the Friendly Hills area of Orange and spent enough afternoons at Santiago Oaks as a kid to know this region’s clay layers and grade shifts better than most engineers who show up with a laptop, and he’ll tell you the same thing he tells every Stanton homeowner: if the structure makes sense on paper, it’ll hold in the field, and if it doesn’t, we fix it before we touch a beam. On these small, built-out Stanton lots, the panel upgrade isn’t an add-on. It’s the gate that lets the CGI cabinets go in at all.
CGI Models & Products We Service in Stanton
We install and renovate the full CGI cabinet range: Euro-style full-overlay slab-door frameless boxes, shaker and raised-panel wood-door lines, quartz and granite countertop programs, and frameless vanity and linen cabinet series. For parts, we use genuine CGI boxes, doors, and hardware where the line is still supported. When a door profile has been discontinued and a box is otherwise sound, we match it with a color-matched aftermarket front rather than forcing a full replacement, which keeps costs down on Stanton’s smaller kitchens. We stock the common CGI hinge and clip hardware locally for fast turnaround, but every job gets specified against the actual door profile and finish before we quote, because CGI’s line changed enough over the years that assuming compatibility is how delays happen.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Stanton
CGI in Garden Grove cabinetry work in Stanton spans from a single vanity swap to a full ADU kitchen, and the price tracks the scope. Countertop and cabinet labor on these older small-lot homes often includes shimming, panel work, and moisture correction that tract-new construction never sees. Here’s what we’re seeing across Stanton right now:
| Scope | Typical Range in Stanton |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Bathroom Remodel | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| ADU Construction | $90,000 – $220,000 |
| Garage Conversion | $30,000 – $80,000 |
What drives the final number is the condition of the framing behind the cabinets, whether the panel needs upgrading, and whether we’re repairing a sound box or replacing a compromised run. A free estimate includes a written line-item quote so you know exactly what’s in scope before we start. Call (833) 756-5936 to schedule yours.
Serving Stanton, CA — Our Local Coverage Area
We’re based in the Stanton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Stanton
The original 100-amp panels on these 1950s tracts can’t carry the dedicated circuits a new CGI kitchen needs: island, dishwasher, disposal, range, and bath fan all draw on the same service. Stanton’s inspectors want the 100-to-200 amp upgrade signed off before they’ll pass the rough for the new kitchen circuits, so the panel has to precede cabinet set or the permit stalls. That’s not optional on a garage conversion. We sequence the panel first, then the rough, then the cabinets. Call (833) 756-5936 for an exact quote on your conversion.
Yes, when the box is sound and the failure is limited to doors, hinges, or drawer fronts. On a small Stanton lot, refacing keeps the cabinet footprint intact and avoids moving plumbing or electrical that a full replacement would force. We use genuine CGI doors where the line is still supported, and match discontinued profiles with color-matched aftermarket fronts. When the carcass has swollen from slab moisture or the run is out of square with the room, we recommend replacement, because refacing over a failed box is throwing money at the wrong problem.
It changes the calendar and the sequence. Stanton’s building division reviews plans locally rather than routing through Orange County, so the review timeline follows the city’s own workload, and the inspectors expect specific items verified in a specific order. The panel upgrade, the moisture barrier detail on slab contact, and the cabinet rough all have to line up with Stanton’s inspection schedule. We’ve permitted enough work in 90680 to know which items this city’s inspectors look at first, and we build the schedule around that. Call (833) 756-5936 for a permit-sequenced quote on your remodel.
On an original single-pane slider, yes, it will accelerate finish degradation. Stanton sits inland with warm dry summers and seasonal Santa Ana events, and a west-facing kitchen wall takes direct afternoon sun for hours a day through glass that has no UV or thermal protection. Painted and thermofoil CGI door fronts will check and fade faster than they should. The practical fix is selecting the right finish at install time and addressing the glazing where the homeowner is already replacing windows. If the cabinets are already installed, we can reface with a finish that holds up better to that exposure. Call (833) 756-5936 for a free finish assessment.
We read the slab first. Where the concrete reads damp, we set the CGI toe kicks and lower boxes on a sealed sleeper with a moisture barrier separating the cabinet from the slab. On one original 1950s single-story stucco tract home near Beach Boulevard in 90680, we converted the shallow single-car garage into an ADU with a CGI frameless kitchen and a small walk-in shower. The slab read damp along the back wall, so the base cabinets went on a sealed sleeper and moisture barrier, and we upgraded the 100-amp panel to 200 amps so the island, disposal, and bath fan circuits would clear Westminster CGI service rough inspection. The ADU passed and the cabinet boxes stayed flat through the following summer. That’s the standard we apply to every Stanton slab-contact install.
Service Areas Near Stanton
Our crews work throughout central and south Orange County, so if you’re just outside Stanton, we’ve got you covered. We provide CGI sales & service across the area, and our Stanton service area extends into neighboring communities. That includes CGI service in Irvine and CGI service in Midway City, along with Laguna Woods, Laguna Hills, and Mission Viejo. Wherever you’re planning a CGI kitchen, bath, or ADU, the same one-contract approach applies.
Book Your CGI Service in Stanton Today
Ready to get a real line-item scope on your CGI kitchen, bath, or ADU conversion in Stanton? We’ll walk the site, check the slab and the panel, and tell you exactly what’s in the wall before we open it. Call (833) 756-5936 to schedule your free estimate.
Written by Nolan Driscoll, Owner at Iron Beam Contractors, serving Stanton and Orange County.