Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Ben Lomond, CA | Iron Beam Contractors
CGI cabinetry and quartz work in Ben Lomond runs $4,000 to $45,000 depending on scope, and the single biggest factor here isn’t labor cost, it’s moisture. We’re Iron Beam Contractors, an independent CGI installer and refacer serving Ben Lomond, and we check wall cavities, under-floor ventilation, and floor level before we ever order a cabinet box. Call (833) 756-5936 for a free estimate.
Why Ben Lomond Residents Choose Us for CGI Service
We’re not a CGI dealer and we’re not affiliated with the manufacturer. We’re a general contractor that specs and installs CGI products because they hold up when the site conditions are right. And in Ben Lomond, site conditions are rarely right without some correction first.
Nolan Driscoll runs our jobs, and he learned structural work by framing and reinforcing buildings across Orange County for over two decades. He’ll tell you the same thing on a cabinet install that he’d tell you on a foundation: the wall is the cabinet’s structural support. If the wall’s holding water, the cabinet’s holding water. We approach every CGI install in Ben Lomond that way, which is why homeowners call us after another contractor’s work has failed.
From cabinet installation and refacing to quartz and granite countertops and bathroom vanity installation, we handle the whole scope under one contract. We also work through our broader CGI sales & service process, which means one point of accountability from material order to final leveling.
Styles & brands we work with
Common CGI Construction Problems We Solve in Ben Lomond
Here’s what we actually see in Ben Lomond homes, and what causes it:
- Cabinet box swelling and delamination at the toe kick and sink base. Sloped-site foundations hold moisture against the under-floor framing, and homes with poor ventilation wick that dampness up into the box. By the time the homeowner notices the bottom shelf sagging, the plywood has usually started separating. We replace the box, add continuous vapor barrier under the base, and correct ventilation if it’s the root cause.
- Quartz countertop edge chipping and seam failure on uneven floors. Older redwood-era cabins settle in ways that leave floors out of level by half an inch or more across a run. Cabinets rack, the quartz can’t sit flat, and seams open up. We check floor planarity before template and level cabinets as needed.
- Drawer glides and hinges corroding or binding in humid bathrooms. Under the redwood canopy, bathrooms run humid year-round, and hardware that would last fifteen years in a dry climate can bind in five. We swap in quality aftermarket soft-close glides and hinges with corrosion-resistant coatings when the OEM hardware is the weak point.
- Door and drawer front warp on north-facing kitchen walls. North-facing walls in Ben Lomond stay shaded and damp far longer than a sun-exposure chart predicts. We’ve pulled warped CGI doors off cabinets that were only four years old, and the wall behind them had moss on the sheathing. We won’t hang new fronts on a wall that’s still holding moisture.
- Racking drawers and misaligned faces from unlevel floors. This shows up as drawers that bind on the left or right and doors that won’t close square. It’s rarely the cabinet itself. Most of the homes we see were built on slopes with drainage that has shifted over decades. We correct the level before we set the cabinets.
CGI Service in Ben Lomond: What Local Conditions Mean for Your Equipment
Ben Lomond’s redwood canopy keeps north-facing roofs and walls shaded, so wood siding and roof sheathing stay damp far longer than sun-exposure charts predict. Before we install CGI cabinets against an exterior wall, we always check the wall cavity and roof-to-wall flashing for hidden moisture that would swell the boxes within a season. That’s not standard procedure on a flat-lot tract home in a sunny suburb. It’s standard procedure here because we’ve seen what happens when it’s skipped.
We recently completed a CGI frameless cabinet and quartz countertop install in a 1960s redwood-era cabin off China Grade. The original sink base had swollen and delaminated from years of moisture wicking up through the sloped-site foundation. We replaced the damaged boxes, added a continuous vapor barrier under the new sink base, and set a CGI quartz top with reinforced seams. Then we corrected the floor level so the drawers no longer racked. That’s the difference between treating the symptom and fixing the job. Nolan’s view is simple: if the structure makes sense on paper, it’ll hold in the field. If it doesn’t make sense on paper, we fix it before we touch a beam.
CGI Models & Products We Service in Ben Lomond
Our crews work with CGI Ready-to-Assemble (RTA) Kitchen Cabinets, CGI All-Wood Bath Vanities, CGI European Frameless Cabinetry, and CGI Quartz Countertops. For warranty-sensitive parts we use OEM CGI hardware and components. When the original hardware is the weak point, which happens a lot in Ben Lomond’s humidity, we specify better aftermarket soft-close glides and corrosion-resistant hinges. If a cabinet box is still structurally sound, we reface and re-hardware before recommending a full replacement. If swelling or delamination has compromised the box, replacement is the honest call. Read more about how we work across the Ben Lomond service area.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Ben Lomond
| Project | Typical Cost in Ben Lomond |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Kitchen Remodel | $14,000 – $45,000 |
A free estimate from us includes a level check of the floors, a look at under-floor ventilation and wall-cavity moisture where cabinets will mount, and a written line-item scope. No change orders hidden in the fine print. Call (833) 756-5936 to schedule yours.
Serving Ben Lomond, CA — Our Local Coverage Area
We’re based in the Ben Lomond area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Ben Lomond
Do CGI cabinets hold up in Ben Lomond’s damp, shaded conditions?
They can, but not by default. Ben Lomond’s redwood canopy keeps walls shaded and damp long after the fog burns off, and any cabinet mounted against an exterior wall needs a dry cavity behind it. We check for hidden moisture and correct ventilation before install, and we add vapor barrier where the foundation is wicking dampness up from sloped soil. Do that, and CGI cabinets perform well here. Skip it, and they fail inside a few seasons.
Can you reface CGI cabinets that have swollen from moisture?
If the box is swollen or delaminated, no. Refacing works when the cabinet structure is sound and only the doors, drawer fronts, and hardware need replacing. Once the plywood has separated or the toe kick is spongy, that box is done. We’ll tell you which one you have. Call (833) 756-5936 and we’ll take a look before you spend a dollar.
What’s the typical cost for a CGI kitchen or bath project in Ben Lomond?
A bathroom vanity installation runs $800 to $3,000, a countertop install $2,000 to $6,500, and a full kitchen remodel with CGI cabinetry and quartz runs $14,000 to $45,000. The Ben Lomond-specific variables are moisture remediation, floor leveling, and access on sloped lots. For an exact quote, call (833) 756-5936 for a free estimate.
Do I need a permit to install CGI cabinets or change a vanity in Ben Lomond?
Cosmetic work like cabinet and vanity replacement generally doesn’t require a permit in Santa Cruz County, but if the project touches plumbing, electrical, or structural elements, permitting comes into play. We handle permits on our scope and pull them when the county requires them. We’ll tell you upfront what applies to your job.
How does Ben Lomond’s wildfire defensibility affect a CGI kitchen or bath project?
Mostly indirectly. Ben Lomond sits in a CAL FIRE Wildland-Urban Interface zone, and defensible-space rules affect exterior work, roofing, venting, and clearance around the structure. An interior cabinet or quartz install won’t trigger WUI requirements on its own, but if your remodel includes an exterior wall, venting, or sheathing work, we coordinate defensible-space considerations into the scope. The county’s Chapter 7A requirements do affect what we can spec on exterior surfaces.
Service Areas Near Ben Lomond
We also serve homeowners through the broader Santa Cruz Mountains and into south Orange County communities, including CGI service in Bonny Doon to the west and CGI service in Communications Hill for clients in that direction. Other towns include Laguna Woods, Laguna Hills, Portola Hills, Los Serranos, Mission Viejo, and Aliso Viejo.
Book Your CGI Service in Ben Lomond Today
If you’re planning a CGI kitchen, bath, or vanity project in Ben Lomond, call (833) 756-5936 and we’ll schedule a free walkthrough. We’ll check the moisture, the level, and the wall cavities before we recommend a single cabinet. That’s the job done right.
Written by Nolan Driscoll, Owner at Iron Beam Contractors, serving Ben Lomond and the San Lorenzo Valley.