Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in San Juan Bautista, CA | Iron Beam Contractors
We provide independent Mr-Glass shower enclosure, mirror, and glass installation service across San Juan Bautista, including jobs inside the historic district where openings are rarely square and wall conditions are never standard. For larger structural work alongside your glass installation, we can also connect you with a General Contractor in San Juan Bautista. The single thing that separates our Mr-Glass work here from anywhere else is this: we template and fit glass to real, often out-of-plumb historic openings rather than selling a stock kit that fights the wall. Call (833) 756-5936 to schedule a free estimate.
Why San Juan Bautista Residents Choose Us for Mr-Glass Service
Nolan Driscoll built Iron Beam Contractors on a principle that matters more in San Juan Bautista than most places: tell the homeowner exactly what’s in the wall before you open it, not after. While we focus here, our team also handles Mr-Glass service in Gilroy with the same upfront approach. That matters here because a bathroom remodel or shower enclosure in a 1920s Third Street building or an adobe-adjacent home is never a simple swap. Framing has settled, thresholds have dipped, and what looked square at a glance hasn’t been square since the Coolidge administration.
We’re an independent construction shop, not a Mr-Glass-authorized dealer, and we don’t claim to be one. Our credibility comes from years of templating and fitting glass to real openings across San Benito County. We use Mr-Glass OEM hardware where the model still supports it, and quality aftermarket stainless when a discontinued line makes OEM parts unavailable. Our full Mr-Glass sales & service capability includes frameless sliders, hinged doors, neo-angle enclosures, and mirrored kits.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in San Juan Bautista
- Roller and track failure on bypass sliders. San Juan Bautista’s valley climate cycles between dry, dusty summers and cool, damp winters. That dust and mineral grit loads the lower track of a Mr-Glass bypass slider, and the original rollers flat-spot within a few years. We replace rollers and re-set the track before the glass starts dragging.
- Sweep and seal degradation letting water escape under the door. The same wet-dry cycling that erodes adobe and rots wood around the plaza also dries out PVC sweeps and seals on enclosures in older Third Street bathrooms. When a sweep fails, water runs onto the floor and into the curb. We replace seals with OEM-spec material and re-detail the threshold so moisture drains correctly.
- Hinge sag and out-of-plumb binding on frameless hinged panels. Pre-war and adobe-adjacent homes in San Juan Bautista have framing that has moved over a century. A frameless hinged panel that was installed to a wall that was never square will eventually bind at the hinge. We check the wall and framing before ordering glass, not after.
- Surface etching and hard-water spotting on glass and mirrors. Bathrooms in older San Juan Bautista homes often have little ventilation and no softened water. Water sits against unsealed panels and trim, etching the glass fast. We can replace the panel and discuss ventilation and water-softening fixes so it doesn’t happen again in two years.
- Stock-kit enclosures that never fit a historic opening. We’ve lost count of how many times we’ve been called to fix a Mr-Glass enclosure that was ordered off a spec sheet and never actually fit the shower. In a town with this many adobe and early-1900s walls, custom templating isn’t an upsell. It’s the only way the job holds up.
Mr-Glass Service in San Juan Bautista: What Local Conditions Mean for Your Equipment
Much of San Juan Bautista’s housing sits inside a National Register Historic District wrapped around the State Historic Park. What that means for a Mr-Glass enclosure is specific and unavoidable: a bathroom or shower scope that changes a visible opening or exterior finish on a Third Street building can pull historic design review. Our enclosure dimensions and frame finishes sometimes have to be settled with the review process before glass is ordered, not after. A contractor who doesn’t know this will order glass, hit the review wall, and leave you with a paid-for panel that doesn’t meet guidelines. We work within that process as a matter of course. If the structure makes sense on paper, it’ll hold in the field. If it doesn’t make sense on paper, we fix it before we touch a beam.
Mr-Glass Models & Products We Service in San Juan Bautista
We service and install the full range of San Juan Bautista service area Mr-Glass product lines. That includes frameless sliding shower doors in single bypass configuration, neo-angle frameless corner enclosures, semi-frameless hinged shower doors, and mirrored closet and wall mirror kits. For repair work, we stock Mr-Glass OEM rollers, hinges, handles, sweeps, and seals for current-model enclosures. When a discontinued model makes OEM parts unavailable, we use quality aftermarket stainless hardware rather than forcing a repair that won’t last. If the frame, glass, or wall behind is compromised, we’ll say so plainly and price a full enclosure rather than sell a repair that will fail again in a season.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in San Juan Bautista
Here’s what Mr-Glass work actually costs in the San Juan Bautista market, based on the scope of the job and the condition of the walls we’re working with.
| Service | Typical Price Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Shower Replacement | $3,000 – $8,500 |
What drives the number is the wall condition. A square, well-framed opening in a newer home is a different job from an out-of-plumb adobe-adjacent wall that needs blocking and re-detailing before glass goes in. Every estimate includes a site visit, measurement, and a written line-item quote. Call (833) 756-5936 for an exact number on your scope. Estimates are free.
Serving San Juan Bautista, CA — Our Local Coverage Area
We’re based in the San Juan Bautista area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in San Juan Bautista
Yes, and we do it regularly, but the process depends on whether the opening or exterior finish changes are visible enough to trigger historic design review. In many Third Street buildings, interior bathroom work on an existing opening clears without additional review. When the enclosure changes a visible window, vent, or exterior finish, we work the dimensions and frame finish through the review process before ordering glass. Call (833) 756-5936 and we’ll tell you which path your job takes.
That’s almost always the rollers and track. San Juan Bautista’s dry summers load the lower Mr-Glass bypass track with dust and mineral grit, and the rollers flat-spot. The glass then drags and squeals against the track. It’s a wearable part, not a defect. We replace the rollers and re-set the track, and the door moves like it should.
It does, and more than people expect. The wet-dry cycle causes PVC sweeps and seals on Mr-Glass enclosures to dry out and crack during the warm months, then take on water during the cool, damp months. That accelerates failure along the bottom edge. It’s the same seasonal stress that erodes adobe and rots wood around the plaza. Seals are a maintenance item here.
Yes, but it has to be templated, not ordered off a stock spec. Adobe and early-1900s walls are rarely plumb, and the openings are often out of square. We verify the framing and curb, shim and block where the structure needs it, then template the glass to the actual opening. Cement stucco over adobe is a common mistake we correct in remodels; it traps moisture and damages the wall. We use breathable finishes where the wall calls for them.
Yes. We install and service Mr-Glass mirrored closet kits and wall mirror kits along with frameless and semi-frameless shower enclosures. The same templating and fitting discipline applies. A mirror on a settled Third Street wall needs the same care as a shower panel.
Service Areas Near San Juan Bautista
We serve San Juan Bautista and the surrounding San Benito County communities. If you’re in Mr-Glass service in Prunedale, Mr-Glass service in Brisbane, or nearby areas, our team covers that territory too. Same Mr-Glass expertise, same templating discipline.
Book Your Mr-Glass Service in San Juan Bautista Today
If you have a Mr-Glass enclosure or mirror project in San Juan Bautista, don’t gamble on a stock kit. Call (833) 756-5936 to schedule a free estimate, and we’ll measure, template, and price the job against your actual walls.
Written by Nolan Driscoll, Owner at Iron Beam Contractors, providing independent Mr-Glass service throughout San Juan Bautista and San Benito County. For glass and mirror work farther north, see our Mr-Glass in Aromas coverage.