Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Construction in Capitola, CA | Iron Beam Contractors
We provide independent Therma-Tru door service across Capitola, from the Village flats to the Depot Hill bluffs. What makes our Therma-Tru work here different is simple: we install and repair these doors against salt air, pier-and-post foundations, and coastal permitting that most inland crews never see. If your Therma-Tru entry or patio door is binding, delaminating, or leaking, call us at (833) 756-5936. We’re Iron Beam Contractors, and we’ve been doing Therma-Tru sales & service long enough to know exactly how these doors age a block from Monterey Bay.
Why Capitola Residents Choose Us for Therma-Tru Service
Therma-Tru doors are built well, but they are not built specifically for Capitola. The Fiber-Classic and Smooth-Star lines leave the factory expecting a square rough opening and a dry climate. Here, neither assumption holds. We work on these systems weekly, so when a homeowner in the Village tells us their door drags only in winter, we know the raised pier-and-post foundation has shifted with the wet-season soil, not that the door is defective. Nolan Driscoll, our owner, spent years framing and reinforcing everything from single-family additions to commercial tenant improvements before founding Iron Beam Contractors. He brought that structural background to door work for one reason: a door that binds on a moving coastal frame is a framing problem, not a hardware problem. When we replace or repair a Therma-Tru door in Capitola service area, we fix the opening first, then the door.
We use genuine Therma-Tru replacement sills, sweeps, weatherstrip, and multi-point lock hardware wherever the slab, stiles, and rails are still sound. And we’re straight with you when they’re not. A fiberglass skin that has delaminated from years of salt-laden onshore air is not worth patching. We tell you that up front, before we open the wall.
Styles & brands we work with
Common Therma-Tru Construction Problems We Solve in Capitola
- Finish chalking and edge delamination on west-facing doors. Salt-laden air off Monterey Bay attacks painted fiberglass skins fast. We regularly see Fiber-Classic doors on Village and Depot Hill homes showing chalked finishes and lifted edges within three or four seasons of install. The fix depends on how far the skin has separated: minor edge lift can be re-sealed, full-sheet delamination means replacement.
- Swollen, soft composite thresholds and bottom-rail rot. Winter storm surf and flood events along Soquel Creek and Noble Gulch push moisture up against door bottoms. Composite and wood-edge thresholds wick that water, and we find swelling, soft corners, and rotted bottom rails where the slab sits close to grade. A threshold replacement with proper back-dam and flashing usually stops the cycle.
- Multi-point hardware binding and corroding. When a home’s raised foundation shifts, adjustable hinges and multi-point locks bind. Doors that swung fine inland go out of square and drag on the sill here. We re-square the slab and swap in stainless hardware that survives the marine layer.
- Leaking jambs from missing head flashing or back-dam. This is the one we see most on tear-outs. Tight coastal openings without head flashing or a proper threshold back-dam let wind-driven rain behind the brickmold. The jamb legs rot, the interior casing fails, and the homeowner has no idea until the trim comes off.
- Out-of-square rough openings on bluff-edge homes. On Depot Hill, where rear footings sit near an eroding bluff, the rough opening is rarely square. Forcing a new Therma-Tru slab into a skewed frame guarantees future binding and seal failure. We re-frame and re-flash before the new door goes in.
Therma-Tru Service in Capitola: What Local Conditions Mean for Your Equipment
Here is the thing about Capitola that changes how our Home Remodeling in Capitola handles Therma-Tru work, and you won’t find this on a generic Therma-Tru page. Most cottages and bungalows in Capitola sit on raised pier-and-post foundations with a minimal crawlspace. That means every exterior door, every Therma-Tru Fiber-Classic or Smooth-Star slab, has to be shimmed and flashed to a moving, out-of-square frame rather than a concrete slab. On Depot Hill, where bluff-edge homes have footings within a few feet of the eroding coastal bluff, that rough opening often needs to be re-framed before a new door can be set. Add the salt air, and standard galvanized fasteners corrode within a season or two. We spec corrosion-resistant fasteners and stainless hardware on every exterior door we install in Capitola. If the structure makes sense on paper, it’ll hold in the field. If it doesn’t make sense on paper, we fix it before we touch a beam.
On a Depot Hill bluff-top cottage near Therma-Tru in Rio Del Mar territory, our crew pulled a sun-chalked, delaminating Fiber-Classic entry door whose threshold had rotted through from wind-driven rain. The rear footings sat close to the eroding bluff edge and the pier-and-post frame was out of square. We re-framed and re-flashed the rough opening, then set a new Therma-Tru Smooth-Star slab with a composite sill and stainless multi-point hardware, sealing the jamb legs against the marine layer so the next storm surf stays outside.
Therma-Tru Models & Products We Service in Capitola
We work across the Therma-Tru line: Fiber-Classic and Fiber-Classic Oak entry doors, Smooth-Star fiberglass entry and patio doors, Sliding and Hinged Patio Door Systems, and the Pulse and Benchmark entry lines. The distinction we make on every job is OEM versus aftermarket. For seals, sweeps, weatherstrip, and multi-point locks, we use genuine Therma-Tru parts because the tolerance and finish matter. For framing, flashing, and fasteners, we choose what actually holds up in Capitola’s salt air and moving foundations, which is sometimes a better spec than what the original installer used. We keep common Therma-Tru replacement sills and weatherstrip on hand so we can turn around most Village and Depot Hill jobs without waiting on a parts shipment.
See the difference
Before
After
Before
After
Before
AfterTherma-Tru Service Pricing in Capitola
| Service | Price Range |
|---|---|
| Window Replacement | $4500 – $15000 |
| Impact Window Installation | $8000 – $25000 |
| Roof Repair | $400 – $1800 |
Door-specific work like slab replacement, threshold rebuilds, and multi-point hardware swaps is priced by the opening, not the door. What drives cost in Capitola is what we find when the brickmold comes off: rotted jamb legs, a skewed rough opening, missing flashing, or a pier-and-post frame that has settled past the point of shimming. A free estimate means we inspect the full opening, check the foundation’s effect on the rough frame, and give you a line-item quote before any work starts. Call (833) 756-5936 to schedule yours.
Serving Capitola, CA — Our Local Coverage Area
We’re a Capitola General Contractor based in the area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Therma-Tru Construction in Capitola
Yes, if the slab, stiles, and rails are still sound. Corroded multi-point hardware, worn sweeps, and weathered weatherstrip are all replaceable with genuine Therma-Tru parts, and that’s usually a same-day fix. If the bottom rail has rotted or the fiberglass skin has delaminated from salt and moisture exposure, patching it is a losing bet in Capitola’s marine air. Call (833) 756-5936 and we’ll tell you straight which category your door falls into.
Because your home sits on a raised pier-and-post foundation and the wet-season soil swells, shifting the frame out of square. The door was square when installed; the house moved. We re-shim and re-square the slab to the opening, and if the rough frame itself has settled out of tolerance, we re-frame before re-hanging.
Stainless steel. Multi-point locks, hinges, and fasteners in a marine-grade stainless finish. Standard galvanized hardware starts showing corrosion within a season or two this close to Therma-Tru in Seacliff and Monterey Bay, and any installed hardware that’s already binding is usually the first thing we replace.
Often yes. Bluff-edge properties on Depot Hill fall under coastal permitting and geotechnical review when the work touches the exterior envelope, including door openings that sit near the bluff line. We pull the permits and coordinate the review as part of the job, so you’re not left chasing the Coastal Commission alone.
We install head flashing above the brickmold, a back-dam at the threshold, and seal the jamb legs against wind-driven rain before the slab is set. On Capitola cottages with pier-and-post foundations, we also re-square and reinforce the rough opening first, because flashing can’t compensate for a frame that’s moving. Call (833) 756-5936 for a free estimate and a line-item quote on the whole job.
Service Areas Near Capitola
We also serve Therma-Tru service in Soquel and Therma-Tru service in Twin Lakes, along with Aptos and the Seabright area. If you’re a few minutes outside Capitola and your Therma-Tru door needs a look, call us; we cover the whole stretch of coast from the Village north to the county line.
Book Your Therma-Tru Service in Capitola Today
If your Therma-Tru door is binding, leaking, or losing its finish to the salt air, call (833) 756-5936. We’ll inspect the opening, the frame, and the slab, then give you a real quote before any work starts. Serving Capitola with Therma-Tru service from Iron Beam Contractors.
Written by Nolan Driscoll, Owner at Iron Beam Contractors, serving Capitola since opening our doors to coastal projects.