Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Lompico, CA | Iron Beam Contractors
We install and repair Unilock paver driveways, patios, and retaining walls throughout Lompico as a Lompico General Contractor, not a dealer affiliate. What makes our Unilock work different here comes down to logistics: on Lompico’s single-lane private roads, material delivery and base prep have to be sequenced differently than anywhere down the hill. Call (833) 756-5936 for a free estimate, and we’ll walk your property before we quote it.
Why Lompico Residents Choose Us for Unilock Service
Nolan Driscoll runs Iron Beam Contractors with a simple rule: understand what’s under the surface before you build on top of it. That matters more in Lompico than almost anywhere in the county. We’ve rebuilt too many failed paver jobs that looked fine for two years, then slumped after one wet winter because the base was never compacted against a saturated cut. Our crews work with Unilock sales & service product lines every week, so we know which pavers hold up under redwood canopy and which ones need a different base strategy. We’re a licensed general contractor serving the entire Lompico service area, and we carry Unilock’s own matching pavers, caps, and edge restraints for repairs that blend instead of looking patched.
Styles & brands we work with
Common Unilock Construction Problems We Solve in Lompico
- Efflorescence and moss film on Brussels Block and Roma pavers. Lompico’s redwood canopy blocks UV drying for months at a stretch, and damp winters keep paver surfaces wet long enough for white mineral deposits and green moss to take hold. We clean with the right pH chemistry, not a pressure washer on full blast, then re-sand joints with polymeric material that resists moss rooting.
- Base failure and edge slumping on paver driveways cut into steep grades. When a driveway is carved into a canyon slope without geotextile fabric and properly compacted aggregate, the outside edges start dropping within the first heavy rain season. We rebuild the subbase properly the first time, compacted in lifts, with edge restraint that actually holds.
- Retaining wall block settlement and face cracking on Pisa2 courses. Walls built against saturated cut slopes above the San Lorenzo watershed face hydrostatic pressure most contractors never account for. We add drainage aggregate and weep zones behind the wall, then rebuild courses so the face stays plumb through wet winters.
- Shifting and rutting at driveway apron transitions. Heavy trucks tracking onto pavers with an undersized compacted base creates ruts at the transition in months. We dig out the apron zone, rebuild the base at proper depth, and reset pavers so the junction handles load without deformation.
- Unpermitted legacy patios that trigger code review. Lompico has plenty of older cabins with additions or paver work that never went through Santa Cruz County. When we touch a project, we help owners understand what needs to be brought up to current code before we lay a single paver.
Unilock Service in Lompico: What Local Conditions Mean for Your Equipment
Here’s what actually changes for Unilock paver work in Lompico: your driveway is probably single-lane, winding, and steep enough that a standard delivery truck or concrete mixer cannot make the run. We plan every paver project around that reality. Pallets get staged at the flat spot near the driveway mouth, then we shuttle smaller loads up with equipment that can handle the grade. It changes how we sequence base prep, and it changes how we schedule the job. On a recent project off Lompico Road, our crew rebuilt a rutted driveway apron and short run of Brussels Block that had settled because the original base sat on a wet, uncompacted cut. We staged pallets at the flat spot near the driveway mouth, rebuilt the subbase with geotextile and compacted aggregate, and reset the pavers with fresh edge restraint and polymeric sand so the winter runoff now sheds instead of pooling under the surface. That’s the difference between a contractor who has done Lompico work and one who shows up with a generic plan.
Unilock Models & Products We Service in Lompico
We install and repair the full Unilock structural and paver range, including Brussels Block pavers, Beacon Hill flagstone pavers, Pisa2 retaining wall systems, and Roma pavers, with Unilock in Brookdale handled the same way. For repairs, we use Unilock’s own matching pavers, caps, and anchoring systems so blends and course heights stay true. Where performance is equal and OEM markup adds no value, we switch to compatible aggregate base and polymeric joint sand rather than paying for a brand name on material that goes under the surface. We stock the most common Unilock paver types and edge restraints locally for faster Lompico turnaround, and special-order anything less common with a clear lead time.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Lompico
Paver work in Lompico runs higher than flatland pricing because of the access problem. Staging material at the road and shuttling it up a steep driveway adds labor hours that a flat lot in Scotts Valley never sees. Here’s what our Lompico clients typically see:
| Service | Typical Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
The biggest cost drivers are paver footage, base depth, and how far material has to be shuttled from the road. Every estimate we give in Lompico includes a written line-item breakdown, so you can see exactly what you’re paying for. Call (833) 756-5936 to schedule your free estimate.
Serving Lompico, CA — Our Local Coverage Area
We’re based in the Lompico area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Lompico
Yes, if the base is engineered for the grade. Standard paver driveways work on slopes up to about 7-9% with proper base preparation, geotextile fabric, and a stronger edge restraint. Steeper than that, we recommend a permeable or textured paver system with deeper base and possibly a drainage swale cut into the upper edge. The paver itself is rarely the weak point; the base underneath is. Call (833) 756-5936 and we’ll assess your specific grade.
Yes, without regular maintenance. Lompico’s shaded redwood canopy and damp winters create ideal conditions for moss in paver joints. The fix is polymeric joint sand, which resists moss rooting far better than regular sand, plus periodic cleaning with a moss-specific treatment rather than letting it establish. We can also recommend paver sealers that slow moss growth without making the surface slippery.
We stage pallets at the flat spot near the driveway mouth, then shuttle smaller loads up with compact equipment that can handle the grade and turn radius. This is standard practice for us in Lompico, and it’s why our labor estimate includes material handling that flatland contractors never budget for. Expect the schedule to reflect that extra handling time.
For most patio and paving work, no. For retaining walls over 3 feet in height, or any wall supporting a surcharge like a driveway or structure, you typically do need a Santa Cruz County permit, and depending on your property’s fire-severity zone, Cal Fire review may apply for any significant grading or hardscape work. We pull permits and manage inspections so you don’t have to navigate the county process alone.
Yes, and in many Lompico properties it’s the better choice. Concrete and asphalt crack when the subbase shifts on steep cuts, while paver systems flex without cracking and are easier to repair in sections. We remove the old surface, rebuild the base properly, and install Unilock pavers with edge restraint that handles driveway loads, just as we do for Unilock in Mount Hermon. Call (833) 756-5936 for a free estimate on your specific driveway.
Service Areas Near Lompico
Iron Beam Contractors provides Unilock service throughout the San Lorenzo Valley and surrounding communities. We regularly work in Unilock service in Seven Trees, Unilock service in Ben Lomond, Felton, Boulder Creek, and Scotts Valley.
Book Your Unilock Service in Lompico Today
If your Unilock pavers are slumping, cracking, or just look tired after a Lompico winter, call (833) 756-5936 — we also handle Unilock repair in Felton. We’ll schedule a site walk, assess your base and drainage, and give you a free written estimate with no pressure.
Written by Nolan Driscoll, Owner at Iron Beam Contractors, serving Lompico and the San Lorenzo Valley.