Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Construction in Stanton, CA | Iron Beam Contractors
We’re Iron Beam Contractors, an independent KraftMaid service contractor working across Stanton’s 90680 ZIP. We install, reface, and repair KraftMaid cabinetry in the small post-war tract homes that define this city, and we know how kraftmaid boxes behave when they’re hung on 1950s stucco walls that have shifted half an inch since Truman was president. Call (833) 756-5936 for a free estimate, and we’ll tell you whether your cabinets need a re-hinge or a re-think.
Why Stanton Residents Choose Us for KraftMaid Service
We’ve torn out and rebuilt enough KraftMaid cabinetry in Stanton to know the difference between a door that’s delaminating and a wall that’s out of plumb behind it. That’s the distinction most cabinet installers miss. Nolan Driscoll grew up in the Friendly Hills area and learned construction through the Building and Construction Technology program at Santiago Canyon College, then spent two-plus decades framing and finishing across Orange County. When our crew sets KraftMaid boxes in a Stanton kitchen, we check what’s behind the wall before we level the first cabinet — the same approach we take with Westminster KraftMaid service.
We work as an independent KraftMaid contractor, not a manufacturer affiliate. That means we answer to you, not to a brand rep. We source genuine KraftMaid doors, drawer fronts, and hardware where the series is still supported, and we spec quality aftermarket parts when the original profile’s been discontinued. You get an honest fix, not a sales pitch for a full replacement you don’t need. KraftMaid sales & service is what we do, and in Stanton we do it on the houses this city actually has.
Styles & brands we work with
Common KraftMaid Construction Problems We Solve in Stanton
Stanton’s housing stock is predominantly single-story stucco tract homes from the 1950s and 60s. That shapes every failure mode we see. Here are the five we fix most often:
- Delaminating doors on sunny south-facing walls. KraftMaid painted and foil-wrapped doors blister when summer sun and Santa Ana heat cycles bake the same wall for sixty years. In Stanton’s warm dry summers, that’s a repeat call for us. We strip, re-face, or replace the affected doors and re-seal the edges so it doesn’t come back next season.
- Worn drawer glides and hinges on Vantage and Momentum boxes. When the original 1950s plumbing or electrical was never upgraded, remodels get sequenced around old supply lines. Cabinets get shimmed, pulled, and re-hung during the work, and cheap hardware gives out. We install full-extension glides and soft-close hinges rated for decades, not display-room cycles.
- Swollen toe kicks and end panels. Slow leaks from aging supply lines and old sink cutouts wick into cabinet bases. In post-war tract homes with original galvanized pipe, that moisture shows up as swollen toe kicks and loose shelf pins. We find the leak first, then fix the cabinet box.
- Sagging wall cabinets on out-of-plumb framing. Original stucco walls and wood framing in Stanton’s 1950s-60s stock are rarely square. Wall cabinets that were hung level to the face of the old wall start sagging within a few years. We re-block and re-shim before we re-hang.
- Doors out of alignment after seismic or settling movement. Small lots, dense coverage, and old foundations mean slight settling over decades. KraftMaid doors that once closed cleanly start rubbing. We re-align hinges and re-set door reveals so the whole run sits square again.
KraftMaid Service in Stanton: What Local Conditions Mean for Your Equipment
Here’s the thing about Stanton that changes how KraftMaid work gets done here. Stanton’s building division handles plan check in-house, not through the county. So a kitchen remodel that moves a KraftMaid cabinet run, relocates a sink, or opens a wall has to be sequenced around Stanton’s own permit calendar and inspection schedule, not a generic Orange County timeline. We scope the cabinet layout before the first box is ordered because we know which changes trigger a plan check review in Stanton and which don’t. That’s not true in a neighboring city that routes through the county, and it’s why our Stanton projects start with a layout review, not a tape measure and a prayer — unlike our KraftMaid in Cypress work.
On a 1950s single-story stucco tract home off Beach Boulevard, our crew tore out a failing KraftMaid Vantage kitchen and found the original 100-amp panel and out-of-plumb framing behind the wall cabinets. We re-shimmed and re-blocked the wall, upgraded the panel, and set new KraftMaid Momentum full-overlay cabinets with quartz tops and a tile backsplash. The doors closed cleanly, and the layout finally cleared Stanton’s plan check. If the structure makes sense on paper, it’ll hold in the field. If it doesn’t make sense on paper, we fix it before we touch a beam.
KraftMaid Models & Products We Service in Stanton
We work on the full KraftMaid lineup that shows up in Stanton kitchens and baths. The Vantage series is the entry-level all-plywood option we see most often in mid-century remodels. Momentum is the framed, full-overlay line that reads modern without going frameless. Passport is the frameless, full-access series that works well in small galley kitchens where every inch of drawer counts. We also service the Maple and Cherry door collections in painted and stained finishes.
Our parts approach is simple. If the series is still supported, we order genuine KraftMaid replacement doors, drawer fronts, hinges, and glides. If the profile’s discontinued, we source quality aftermarket hardware and custom end panels that match the existing finish closely enough that you won’t notice the difference from across the room. We keep common hinge and glide profiles stocked locally so a Stanton service call doesn’t wait on a freight shipment.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Service Pricing in Stanton
What you pay depends on whether you’re refacing a run, replacing a handful of doors, or gutting the kitchen down to studs. Here are the ranges we quote for KraftMaid work in Stanton:
| Service | Price Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Full Kitchen Remodel | $14,000 – $45,000 |
A free estimate includes a site visit, cabinet condition assessment, and a written line-item scope. We don’t bid blind over the phone because we need to see the wall behind the boxes. Call (833) 756-5936 and we’ll set a time.
Serving Stanton, CA — Our Local Coverage Area
We’re based in the Stanton area and know this community well, and we also handle KraftMaid in Garden Grove. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – KraftMaid Construction in Stanton
Yes, if the boxes are structurally sound and the frames haven’t wicked moisture, we can reface the doors and drawer fronts, re-align the hinges, and install new hardware. If water damage has swollen the toe kicks or the rear panels have pulled loose, refacing is throwing good money after bad, and we’ll say so. Call (833) 756-5936 for an honest assessment.
Cabinet replacement alone typically doesn’t trigger a permit. But if your Stanton project moves a sink, opens a wall, changes electrical for under-cabinet lighting, or alters plumbing, the city’s in-house plan check will want drawings before you start. We handle that sequencing for you. That’s the Stanton-specific part most out-of-town contractors miss.
We recommend full-overlay Momentum or frameless Passport in lighter painted finishes for small kitchens. More visible drawer face means less visual clutter. Dark stained cherry on every surface makes a 10-by-10 galley feel like a cave. We’ll show you samples before we order.
A straight cabinet swap takes two to four days. A full gut remodel with countertops, backsplash, and plan check clearance runs three to six weeks depending on Stanton’s inspection calendar. We give you a written schedule before the first box is unloaded.
Sometimes. If the door profile is still produced in a different finish, we can order it and match at the paint or stain level. If the series is gone entirely, we custom-mill end panels and doors to match what’s there. It won’t be factory-perfect, but it’ll be close enough that guests won’t spot it. Call (833) 756-5936 and we’ll tell you what’s possible.
Service Areas Near Stanton
We cover Stanton plus the surrounding Orange County communities. That includes our full Stanton service area, KraftMaid service in Irvine, KraftMaid service in Midway City, and nearby Laguna Woods, Laguna Hills, and Mission Viejo for clients who want the same team across multiple properties.
Book Your KraftMaid Service in Stanton Today
If your KraftMaid cabinets are delaminating, sagging, or just look tired, call (833) 756-5936. We’ll schedule a free estimate, check what’s behind the wall, and give you a written scope. Stanton plan check doesn’t wait, and neither should you.
Written by Nolan Driscoll, Owner at Iron Beam Contractors, serving Stanton since he first learned to level a cabinet on a 1950s stucco wall.