Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Freedom, CA | Iron Beam Contractors
We provide independent CGI construction service across our General Contractor in Freedom, handling everything from all-plywood RTA cabinet installs to standing seam metal roof replacements. The single biggest difference here: Freedom is unincorporated, so every permit runs through Santa Cruz County, not a city counter. That one fact trips up out-of-town builders constantly, and it shapes how we scope CGI work in the 95019 ZIP. We’re Iron Beam Contractors, led by Nolan Driscoll, and we service CGI cabinetry and roofing products without any manufacturer affiliation. Call (833) 756-5936 for a free estimate on your Freedom project.
Why Freedom Residents Choose Us for CGI Service
CGI builds two very different product lines: all-plywood RTA kitchen cabinets and standing seam metal roofing. Most crews know one or the other. We work on both, and we’ve done it across enough Freedom homes to know exactly how each ages in this specific climate. Wet winters with real wind-driven rain, dry summers that bake the flats, and older agricultural-era houses with marginal ventilation. That combination does predictable things to thermofoil doors and metal roof fasteners, and we spec materials accordingly.
Nolan Driscoll grew up in Orange County’s Friendly Hills area and spent years framing and reinforcing structures before building Iron Beam Contractors. His approach carries over to our CGI work: figure out what’s in the wall or under the roof before touching anything. In Freedom that means checking for moisture-swollen boxes before quoting a reface, and checking fastener gaskets before quoting a roof repair. We’re not the cheapest crew in Santa Cruz County, and we’re not trying to be. We quote the repair that actually holds.
We’re also independent. No authorization, no warranty endorsement from CGI. Our credibility comes from county-permitted jobs across the Pajaro Valley, including CGI in Corralitos, not a brand badge on a van. If you want CGI parts matched to OEM where it matters and quality aftermarket where OEM doesn’t pay, we’re the crew that will tell you which is which.
Styles & brands we work with
Common CGI Construction Problems We Solve in Freedom
- Thermofoil and laminate door skins peeling at the edges. Freedom’s wet-winter, dry-summer cycle is rough on sealed cabinet doors. Older homes here often lack real kitchen ventilation, so humidity builds up, the adhesive layer under the thermofoil breaks down, and the skin lifts. The fix is replacement doors, not glue. Read more about our broader CGI sales & service approach.
- Particleboard boxes swelling at the toe kick and sink base. Slow leaks under a sink or seasonal damp coming up through a slab will swell MDF-core CGI boxes until the doors no longer align. This is common in Freedom’s mid-century agricultural worker homes, where original plumbing is often still doing the job it was installed to do 60 years ago. Once the box is swollen, refacing is a waste of money.
- Metal roof fastener back-out and gasket failure at penetrations. Years of winter rain hitting a CGI standing seam roof at just the right angle will loosen fasteners and dry out gaskets around pipes and vents. We see it most on older farm-era roofs around the Pajaro Valley flats, right here in Freedom service area.
- Sagging hinges and misaligned drawer glides. Once a CGI box absorbs moisture and the frame racks even slightly, entry-level hardware starts to bind. Drawers stick, doors hang crooked. It’s not the hardware’s fault; it’s the box moving underneath it.
- Roof penetrations leaking after multiple wet winters. A roofing crew can install the panels right and still get leaks at the pipe boots and vent collars years later. In Freedom’s climate, gaskets and sealant degrade faster than the metal, so penetrations need rework long before the panels do.
CGI Service in Freedom: What Local Conditions Mean for Your Equipment
Because Freedom is unincorporated, every CGI kitchen or roof permit here goes through Santa Cruz County rather than a city building department. That’s not a trivia point. County reviewers apply their own flood-zone checks, especially on parcels near the Pajaro River, and they’ll flag things a city inspector might not. Out-of-town builders skip this step routinely until inspection comes back redlined. We don’t. We scope every CGI roof and kitchen job in Freedom knowing the county will look at drainage, flood compliance, and penetration detailing before they’ll sign off, just as we do for CGI service in Interlaken. That adds a little time up front and saves homeowners the paycheck-costing delay of a failed inspection later.
There’s a field example that sums it up. On a mid-century ranch house off Freedom Boulevard in the 95019 flats, we tore out a water-swollen CGI sink base and refaced the surviving boxes with new thermofoil doors, then tied the new countertop run into county inspection without re-pulling through a city department. In the same job our roof crew replaced lifted fastener gaskets and reseated CGI metal panels that had been leaking at penetrations through several wet winters. The homeowner got a dry, county-signed kitchen and roof without replacing the whole cabinet run. If the structure makes sense on paper, it’ll hold in the field. If it doesn’t make sense on paper, we fix it before we touch a beam.
CGI Models & Products We Service in Freedom
We install and repair CGI Ready-to-Assemble (RTA) all-plywood kitchen cabinets, including full-overlay thermofoil and laminate slab doors. For roofing, we work on CGI standing seam metal panels plus specialty residential trim profiles. Our parts approach is straightforward: we match OEM replacement doors, hinges, and roof panels where CGI still supplies them, and we switch to quality aftermarket glides, gaskets, and fasteners when OEM stock is thin or overpriced. For Freedom turnaround, we keep the common hardware and replacement door skins moving through our supplier channels—plus routes for Watsonville CGI service—so a reface or hinge swap doesn’t stall while a part sits in a warehouse.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Freedom
Here’s what CGI-related construction typically runs in Freedom. These are honest ranges, not a bait quote. Final numbers depend on the size of the box run, the condition of what’s already installed, and whether the county requires any flood-zone add-ons.
| Service | Typical Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Full Kitchen Remodel | $14,000 – $45,000 |
| Countertop Installation | $2,000 – $6,500 |
| Standing Seam Metal Roof | $15,000 – $40,000 |
| Roof Repair | $400 – $1,800 |
A free estimate from us includes a written line-item breakdown, so you’ll see exactly which portions are cabinet boxes, countertop, and labor before any contract is signed. Call (833) 756-5936 to schedule yours.
Serving Freedom, CA — Our Local Coverage Area
We’re based in the Freedom area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Freedom
Yes, we handle all CGI kitchen and roof permits through Santa Cruz County. Freedom has no city building department, so every project goes through the county’s process, including any flood-zone review for parcels near the Pajaro River. We manage that paperwork and correspondence so you don’t have to guess what’s required. Call (833) 756-5936 if you want us to check your parcel’s specific requirements.
That depends entirely on what’s under the door. If the CGI box is still dry and square, refacing with new doors is the cost-effective fix. If the box has absorbed moisture and the frame is racked, refacing is throwing money at a damaged structure. We’ll inspect the boxes before recommending anything. Call (833) 756-5936 and we’ll tell you which direction your kitchen should go.
The metal panels themselves will. The weak points are the fasteners and gaskets at penetrations, which degrade faster in Freedom’s humidity than the steel does. A properly installed CGI standing seam roof with robust penetration detailing will handle the wet winters fine. The job is in the details, not the panel. Call (833) 756-5936 for a roof inspection before the next rainy season.
Often yes. Many farm-era and infill kitchens in Freedom have CGI boxes that are still structurally sound, even if the doors look dated. In those cases we reface, replace counters, swap hardware, and leave the boxes in place. If the boxes are swollen or the layout’s unworkable, we’ll tell you the truth about when a full replacement actually saves money.
It can. Parcels near the Pajaro River may need additional county flood-zone compliance review before permits clear. That review rarely blocks the work, but it can add time to the permitting window. We build that into the schedule from the start so there are no surprises mid-project. Call (833) 756-5936 for an exact timeline on your specific parcel.
Service Areas Near Freedom
We serve Freedom and the surrounding Santa Cruz County communities, with crews familiar with the Pajaro Valley’s permitting quirks from Watsonville up toward Corralitos. Our CGI coverage also extends over the hill into San Martin and Amesti, where similar unincorporated county rules apply. For CGI kitchen or roofing work in those areas, see CGI service in San Martin and CGI service in Amesti.
Book Your CGI Service in Freedom Today
Call (833) 756-5936 to schedule a free CGI estimate in Freedom. We’ll walk your kitchen or roof, tell you what’s actually wrong, and give you a written number before any work starts.
Written by Nolan Driscoll, Owner at Iron Beam Contractors, serving Freedom and Santa Cruz County.