Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Mission District, CA | Iron Beam Contractors
CGI construction service in our Home Remodeling in Mission District means cabinetry and countertop work inside a dense grid of 1880s – 1920s wood-frame buildings, not open-lot new construction. We’re an independent CGI service provider, not manufacturer-authorized or endorsed, and we say that up front. The one thing that makes our CGI work different here is that we treat the building as part of the job: a cabinet that racks in an Edwardian flat is usually a floor-plane problem, not a hinge problem. Call (833) 756-5936 for a free estimate.
Mission District CGI Cabinetry and Countertop Service
Iron Beam Contractors works on CGI sales & service across the Mission District’s Italianate rowhouses, Edwardian flats, and the 1920s multi-unit buildings that line Mission and Valencia. Our scope covers full kitchen remodeling, cabinet installation and refacing, and full bathroom remodeling, with CGI countertops and cabinet lines specified for the building they’re going into. We’re not a parts broker. We’re a general contractor that installs, repairs, and replaces CGI cabinetry and countertops inside buildings where the structure itself is often the hardest variable in the room. Nolan Driscoll, our owner, built this company on the principle that a cabinet reveal that’s off by three-eighths of an inch is usually telling you something about the floor below it, not the box itself. If the structure makes sense on paper, it’ll hold in the field. If it doesn’t make sense on paper, we fix it before we touch a beam. That’s the standard we bring to every CGI kitchen and bath we touch in Mission District.
Styles & brands we work with
Why Mission District Residents Choose Us for CGI Service
Most homeowners here don’t have a generic kitchen. They have a CGI kitchen installed into a 1910 building with plaster walls that aren’t plumb, floors that have settled over filled creek ground, and a microclimate that traps moisture against north-facing walls. We know which CGI lines were actually specified into this housing stock and what fails first when they’re installed against those conditions. We use genuine CGI components where they exist, and proven aftermarket hinges, drawer slides, and leveling legs where the OEM part is discontinued or overpriced. And we’re honest when a box has swelled past repair. In a Mission District flat with an out-of-level floor, refacing a sound CGI frame often beats a full replacement. A water-swollen sink base gets replaced, not veneered over. Nolan grew up reading soil and grade around Orange County, spent two-plus decades framing and pouring before starting Iron Beam, and he’ll tell you the same thing here: the structure comes first, then the cabinets sit straight. Serving Mission District service area is our daily work, not a one-off.
Common CGI Construction Problems We Solve in Mission District
- Thermofoil and laminate slab faces blistering along the sink run. Mission District kitchens in 1920s flats are often small, with no range hood and poor ventilation, so heat and humidity cycle through the cabinet face daily. We see the same failure across a whole block of Edwardian flats installed to the same builder spec.
- CGI doors racking and binding after soft-story retrofit work. Italianate and Edwardian rowhouses on raised foundations over filled Mission Creek ground move. When the floor plane shifts, the reveals on frameless CGI boxes stop lining up. The cabinet is fine. Its reference plane isn’t.
- Sink base bottoms swelling and crumbling. Where soft-story retrofit or exterior wall repair disturbed old drainage and flashing, moisture wicks into the cabinet from the wall and slab side, not the room side. Particleboard and MDF boxes absorb it fast.
- Quartz seams and laminate edge banding failing against north-facing exterior walls. Coastal fog and winter rain drive moisture through unrepaired window and wall flashing, so the countertop and end panels take the water before anyone notices the wall above them.
- Out-of-level cabinet runs after foundation settling. The Mission sits on filled bay shoreline and former sand dunes. Floors don’t stay put. We reset CGI runs to a laser level and correct the substrate before remounting the boxes.
What Mission District Conditions Mean for Your CGI Kitchen
The Mission’s street grid was laid over filled Mission Creek and former sand dunes, and much of the district falls under historic-conservation review. That means a rear kitchen bump-out tied to a CGI cabinet layout, or even a window change that shifts countertop runs, can pull historic-review conditions and an excavation look at undocumented fill into the same permit. A mile outside the district, none of that applies. Here, it’s routine. We hit old creek-bed mud and buried foundations during excavation, and we plan for it before the first cabinet box gets ordered. On a Valencia Street Edwardian flat, we pulled a CGI thermofoil kitchen whose sink run had swelled and peeled after years of a leaking exterior wall, and found the floor had settled toward the rear of the building over old creek-bed fill. We replaced the water-damaged sink base and end panels with new CGI boxes, reset the run to a laser level, and re-flashed the wall before the quartz went back on. Then we matched the surviving upper doors with a refacing kit instead of tearing out cabinetry that was still sound. That’s the difference between treating a CGI problem and treating the building around it.
CGI Models & Products We Service in Mission District
We service the CGI lines most commonly specified into Mission District kitchens and baths: Euro-style frameless full-overlay cabinetry, raised-panel and Shaker-style solid-wood door lines, thermofoil and laminate slab cabinet fronts, and CGI quartz and granite countertop programs. We carry genuine CGI hinges, drawer slides, and leveling legs for fast turnaround, and we keep proven aftermarket equivalents on hand for discontinued OEM parts. When a project needs new CGI boxes, we order them factory-fresh and install them to the existing run, matching door styles so a partial replacement doesn’t look like a patch job.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Mission District
CGI cabinet and countertop work in Mission District General Contractor pricing depends on scope, building condition, and how much structural correction the room needs before the cabinets go in. A straight cabinet swap in a level 1950s building costs less than a full kitchen remodel in a settled Edwardian flat over filled creek ground. Here are the ranges we work within:
| Project | Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
Every estimate is written and line-itemed, and we walk you through what’s structure, what’s cabinetry, and what’s countertop. Call (833) 756-5936 to schedule a free estimate in Mission District.
Serving Mission District, CA — Our Local Coverage Area
We’re based in the Mission District area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Mission District
Is Iron Beam Contractors authorized by CGI?
No. We’re an independent CGI service provider and we state that up front. We’re not sponsored, authorized, or endorsed by CGI. Our credibility comes from years of installing, repairing, and replacing CGI cabinetry and countertops in Mission District homes where the building itself is often the hardest part of the job.
Do you use genuine CGI parts for repairs?
We use genuine CGI components where they exist, including hinges, drawer slides, and leveling legs. Where the OEM part is discontinued or overpriced, we install proven aftermarket equivalents and tell you exactly what went in and why. We never pass off a substitute as OEM without saying so.
How long does a CGI cabinet repair take in Mission District?
Most single-cabinet repairs, refacing, and hardware swaps finish in one visit. A full kitchen run reset over an out-of-level floor takes longer because we correct the substrate before remounting boxes. Call (833) 756-5936 and we’ll give you a realistic timeline for your building.
Which CGI models do you service?
We service CGI Euro-style frameless full-overlay cabinetry, raised-panel and Shaker-style solid-wood door lines, thermofoil and laminate slab cabinet fronts, and CGI quartz and granite countertop programs. If it’s a CGI line that was commonly specified into Mission District flats and rowhouses, we’ve worked on it.
How much does a CGI kitchen cabinet repair cost in Mission District?
Cabinet installation runs $4,000 – $13,000 depending on scope, and a small kitchen remodel runs $9,000 – $20,000. Repairs like hinge replacement or door re-hanging land lower. The building variable matters more in Mission District than most places: a settled floor changes the math. Call (833) 756-5936 for an exact quote. Estimates are free.
Service Areas Near Mission District
We also provide CGI service in Noe Valley and CGI service in San Francisco more broadly. Homeowners in Laguna Woods, Laguna Hills, Portola Hills, Los Serranos, Mission Viejo, and Aliso Viejo can reach us at (833) 756-5936 for CGI cabinetry and countertop work.
Book Your CGI Service in Mission District Today
If your CGI kitchen is racking, peeling, or sitting on a floor that’s moved, call (833) 756-5936. We’ll come out, look at the building and the cabinets together, and give you a written estimate. Free estimates across Mission District, 94110.
Written by Nolan Driscoll, Owner at Iron Beam Contractors, serving Mission District and the surrounding Bay Area.