Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Moss Beach, CA | Iron Beam Contractors
We provide independent CGI cabinet, countertop, and kitchen remodel service across Moss Beach, from full kitchen builds to refacing and hardware replacement. The thing that makes CGI work different here is the same thing that makes every exterior job here different: wind-driven rain, persistent fog, and salt air that attack the building envelope before they ever touch a cabinet face. If you’re dealing with peeling door edges, swollen toe-kicks, or corroded hinges on a Moss Beach CGI kitchen, call (833) 756-5936 for a free estimate.
Why Moss Beach Residents Choose Us for CGI Service
We know the CGI line because we’ve installed and reworked it in enough fog-belt homes to understand exactly where it fails. The box construction, the hardware, the finish lines – they all behave differently in damp, salt-heavy air than they do inland. Because we’re independent, we spec the CGI line against the actual house and its moisture conditions rather than selling whatever the manufacturer is pushing that quarter. Nolan Driscoll built Iron Beam Contractors on the principle that the homeowner deserves to know what’s in the wall before we open it, not after. That matters on this coast, where what’s behind the cabinet is usually the real problem.
We work as a Moss Beach General Contractor, which means we handle the kitchen or bathroom remodel as one job, not a parade of disconnected subs. From blueprint to backyard, one contractor, every phase. You call us, we own it.
Styles & brands we work with
Common CGI Construction Problems We Solve in Moss Beach
- Peeling paint and thermofoil at the bottom edge of door faces. Moss Beach fog keeps cabinet bases damp, and the bottom edges on sink runs are the first place CGI painted and thermofoil doors blister. We see it constantly in the beach cottages and small custom homes along the shoreline.
- Swollen particleboard or MDF cores at toe-kicks and back panels. When wind-driven rain gets past older single-pane windows and under siding, it soaks the cabinets from behind. By the time the front looks wrong, the box has usually been wet for months.
- Corroded standard-steel hinges, slides, and drawer screws. Salt spray off the Pacific doesn’t care what brand the hardware is. Within a few seasons, OEM steel starts binding. Doors sag, drawers drag, and the fix is either constant lubrication or a swap to corrosion-rated components.
- Laminated and engineered-stone countertop seams lifting and darkening. Persistent humidity and window condensation sitting on edge banding will lift and stain CGI seams, especially on runs that butt against a window or an exterior wall.
- Caulk and flashing failures above the cabinet run. This is the one most people don’t think to look for. On a Moss Beach kitchen, the failure point behind a CGI install is rarely the cabinet face itself. It’s the flashing and caulk line above it, which inland contractors don’t think to inspect.
None of these are cosmetic problems. They’re envelope problems showing up on your cabinetry. And none of them are unique to Moss Beach, but every one of them is more common here than in CGI in El Granada, San Bruno, or anywhere else over the hill. The climate doesn’t give your cabinets a break.
CGI Service in Moss Beach: What Local Conditions Mean for Your Equipment
The same onshore wind that makes a deck in Moss Beach pleasant in the afternoon drives rain sideways under siding and trim. On this coast, the failure point behind a CGI kitchen or bath is rarely the cabinet face – it’s the flashing and caulk line above it that CGI in Half Moon Bay or inland contractors don’t think to inspect. We learned to check that line first, because in the shoreline cottages along the 94038 zip code, it’s almost always where the moisture is coming from.
On a mid-century beach cottage near the shoreline in Moss Beach, a CGI shaker kitchen had swollen toe-kicks and two sagging cabinet doors on the ocean-facing wall, with salt-fog corrosion on the original hinges. We pulled the affected boxes, traced the moisture to failed flashing above the old single-pane kitchen window, rebuilt that run with sealed core construction and corrosion-rated hinges and slides, and reset the CGI fronts so the sightline and finish matched the rest of the kitchen. That’s the pattern. The cabinet was the symptom. The flashing was the disease.
CGI Models & Products We Service in Moss Beach
We work on the full CGI line: Euro-style full-overlay frameless cabinets, shaker-profile painted and stained cabinetry, raised-panel traditional cabinet runs, and the quartz and laminate countertop programs. When a partial remodel or refacing needs to blend with existing boxes, we match OEM CGI doors, fronts, and hardware. Where the OEM steel won’t survive Moss Beach salt air, we use quality corrosion-rated aftermarket hinges, slides, and fasteners. It’s a judgment call we make based on where the cabinet sits in the house and how much moisture it actually sees. Our team handles the CGI sales & service scope in-house, which means the person ordering parts is the same person who showed up to measure.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Moss Beach
These ranges reflect what homeowners in Moss Beach typically spend with us, not a generic national average. What drives cost in Moss Beach specifically is the condition of the building envelope behind the cabinetry. If the flashing is failed, fixing the box is only half the job.
| Service | Moss Beach Price Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Bathroom Remodel | $9,000 – $28,000 |
Every estimate is free and written as a line-item quote, so you know exactly what you’re paying for before we touch a beam. Built on real brands, real standards. Call (833) 756-5936 to schedule yours.
Serving Moss Beach, CA — Our Local Coverage Area
We’re based in the Moss Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Moss Beach
Fog-belt humidity keeps the base of the cabinet damp, and sink runs are the worst spot. Water sits at the toe-kick, wicks up into the door face, and the paint or thermofoil lets go at the bottom edge first. The long-term fix usually means repairing the moisture source before refacing or replacing the doors. Call (833) 756-5936 and we’ll trace it.
Standard steel hardware does not hold up on the ocean-facing side of a Moss Beach cottage. Salt spray will seize hinges and slides within a few seasons. We spec corrosion-rated aftermarket hardware on runs that see direct exposure, and we keep the parts on hand so we’re not waiting on a distributor.
If the boxes are solid and only the faces and hardware are failing, refacing with OEM CGI doors and fronts is a clean, cost-effective path. If the cores are swollen or delaminating at the toe-kick or back panel, refacing is a bandage. We’ll tell you which one you have and why. We’d rather lose a refacing job than sell one that fails in three years.
Yes. A bathroom vanity in a Moss Beach cottage deals with the same fog and salt air as CGI in Pacifica or the kitchen, plus shower humidity. We spec sealed core construction and corrosion-rated hardware on any vanity that shares an exterior wall. It costs a little more and it’s worth every dollar on this coast.
It affects everything behind the cabinet run. Rain that drives sideways under siding and trim soaks the wall cavity, and that moisture ends up in the back panel and toe-kick of the cabinets. The kitchen is not separate from the envelope. If you ignore the exterior, you’ll be redoing the interior. That’s the honest answer. Call (833) 756-5936 for an estimate and we’ll show you where the water is getting in.
Service Areas Near Moss Beach
We cover Moss Beach and the surrounding coastal and hill communities. We also provide Moss Beach service area coverage across the full 94038 zip, plus CGI service in Montara and CGI service in San Bruno. If your project sits near Laguna Woods or any part of San Mateo County, call and we’ll tell you straight whether it’s in our range.
Book Your CGI Service in Moss Beach Today
If the structure makes sense on paper, it’ll hold in the field. If it doesn’t make sense on paper, we fix it before we touch a beam. Call (833) 756-5936 to schedule your free CGI estimate in Moss Beach.
Written by Nolan Driscoll, Owner at Iron Beam Contractors, serving Moss Beach and the San Mateo County coast.