Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in San Bernardino, CA | Iron Beam Contractors
We handle CGI cabinet, countertop, and surface work across San Bernardino as an independent installer and finish contractor, and we also provide CGI service in Muscoy. We’re not authorized, sponsored, or endorsed by CGI, and we don’t pretend to be. What makes our CGI work different here is that we map every install and reface decision onto one thing nobody else accounts for: San Bernardino’s valley-to-wildland gradient, where a settled 1950s slab in 92404 behaves nothing like a Chapter 7A foothill lot at the mountain base. Call (833) 756-5936 for a free estimate.
Why San Bernardino Residents Choose Us for CGI Service
CGI cabinetry and surfaces show up in a lot of San Bernardino kitchens, from the small stucco bungalows in 92404 to the larger foothill custom homes above the valley. We’ve installed, refaced, and corrected enough CGI box, door, and surface packages to know exactly where the brand holds up and where it gives out in this climate. Nolan Driscoll runs Iron Beam Contractors on one principle: tell the homeowner what’s in the wall before you open it, not after. That’s why we probe for settled slabs and trapped moisture before we touch a CGI cabinet run. If the structure makes sense on paper, it’ll hold in the field. If it doesn’t make sense on paper, we fix it before we touch a beam. Our crews handle full-bore CGI sales & service knowledge, but we’re not a dealer and we’re not a manufacturer rep. We’re the contractor who knows how CGI actually behaves once it’s mounted in a San Bernardino house.
Styles & brands we work with
Common CGI Construction Problems We Solve in San Bernardino
CGI products are solid, but San Bernardino tests them in specific ways. Here’s what we see most often, and what it usually costs to make right.
- Thermofoil and laminate door skins peeling at the edges. The valley’s dry Santa Ana heat and intense summer sun hit south-facing kitchen windows hard. Years of that heat cause CGI thermofoil and laminate slab doors to lift at the edges. We reface these doors or match replacements when the box is still square.
- Cabinet boxes and toe kicks swelling or delaminating. In 92404 and 92405, a 1950s slab that’s settled over decades traps moisture against the back of the cabinet. We’ve pulled CGI boxes where the toe kick had swelled a quarter-inch out of square. We check for this before any reface or countertop set in San Bernardino.
- Hinges and drawer glides losing alignment. Older slabs in the valley shift, and CGI hardware shifts with it. Overlay doors start rubbing, gaps open unevenly along a run. We re-align, shim, and replace hinges with OEM CGI hardware where it’s still available.
- Quartz and granite seams opening or chipping. Install a CGI surface over a racked or unlevel existing countertop substrate and the seams will fail. We inspect the substrate before we set any CGI countertop, especially in San Bernardino’s older housing stock where nothing is perfectly level.
- Water-damaged lower boxes from plumbing leaks. Galvanized supply lines from the 1950s and 1960s fail, and water runs behind the base cabinets before anyone notices. We replace the damaged run bank by bank, matching fronts where possible, rather than forcing a full tear-out on a salvageable section.
CGI Service in San Bernardino: What Local Conditions Mean for Your Equipment
Here’s the thing about working in San Bernardino that no other city in the region shares. Within a single permit jurisdiction, you can go from a 1950s tract bungalow on the flat valley floor to a Chapter 7A wildfire-standards lot at the base of the San Bernardino Mountains. That’s a 20-minute drive between two completely different sets of code requirements and substrate conditions. A CGI cabinet and countertop package for a foothill home can require ignition-resistant detailing and slope-driven leveling that the same package in 92405 never touches. On the valley floor, we’re usually working around settling slabs and dry rot. In the foothills, we’re shimming for slope, accounting for drainage, and making sure the materials specified meet wildfire construction standards. Most contractors treat San Bernardino as one job. We don’t. We’ve done CGI in Highland, post-war tract homes, and foothill infill lots, and the prep work looks nothing alike.
CGI Models & Products We Service in San Bernardino
We work on the full CGI range that shows up in San Bernardino kitchens: Euro-style frameless full-overlay cabinetry, raised-panel maple and oak lines, the quartz and granite countertop program, and thermofoil and laminate slab door options. For parts, we match OEM CGI hinges, glides, and door or drawer fronts where the brand still supplies them. When OEM lead times drag or a line is discontinued, we use proven aftermarket hardware. Nobody in San Bernardino should wait months for a drawer glide. On a small bungalow kitchen, refacing a sound CGI box is usually the honest call. On a swollen, out-of-square box over a settling slab, replacement bank by bank beats chasing alignment.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in San Bernardino
You should know what a CGI job costs before you commit. Here are the ranges we see across San Bernardino, from 92410 near the base of the foothills to the older tracts on the valley floor.
| Service | Typical Range in San Bernardino |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
What drives the cost: whether we’re refacing sound boxes or replacing water-damaged ones, whether the slab has settled and needs shimming, and whether you’re on a flat lot or a slope that requires level correction. Your free estimate includes a substrate inspection, a written line-item scope, and a straight answer on what to save and what to replace. Call (833) 756-5936 for an exact quote.
Serving San Bernardino, CA — Our Local Coverage Area
We’re based in the San Bernardino area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in San Bernardino
No. Iron Beam Contractors is an independent contractor. We’re not authorized, sponsored, or endorsed by CGI, and we don’t claim to be. What we bring is installation and correction experience across San Bernardino’s housing stock, and we’re not limited to one brand’s supply chain. When OEM parts are the right choice, we use them. When they’re discontinued or backordered, we don’t make you wait.
It depends on the scope. Refacing cabinets or setting a new CGI countertop on an existing substrate typically doesn’t require a permit in San Bernardino, but moving plumbing, electrical, or structural walls does. We pull permits when the job requires them and we handle the inspections. Foothill properties may also trigger Chapter 7A ignition-resistant material requirements, and we also handle CGI repair in Loma Linda. Call (833) 756-5936 and we’ll tell you up front what your specific address needs.
A reface or cabinet installation on a standard San Bernardino kitchen usually runs 2-5 working days. Countertop templating and install adds another week. If we find substrate rot or slab settlement, we correct it before the finish work, and that extends the timeline. We give you a realistic schedule before we start, and we don’t leave a half-finished kitchen behind.
We service CGI Euro-style frameless full-overlay cabinetry, raised-panel maple and oak lines, the quartz and granite countertop program, and thermofoil and laminate slab door options. If you have an older CGI kitchen in a 1950s-era San Bernardino home, we can usually match doors and hardware without replacing the entire run.
Most correction jobs on a settled slab in 92404 or 92405 fall in the $4,000 to $13,000 range for cabinet work, depending on how many boxes are compromised and whether we’re refacing or replacing. A full kitchen remodel with new CGI cabinets and counters runs $14,000 to $45,000. On a post-war tract house in 92404, our crew pulled a 1990s CGI raised-panel kitchen where the slab had settled along the back wall, and half the toe kicks and lower boxes were swollen and out of square. We re-leveled and shimmed the bases, reset the CGI boxes we could save, replaced the water-damaged run with matching fronts, and set a new quartz countertop with fresh seams. The homeowner got a corrected layout without a full tear-out. Call (833) 756-5936 for a free estimate on your exact scope.
Service Areas Near San Bernardino
We also provide San Bernardino service area coverage and serve nearby communities including Laguna Hills, Mission Viejo, and Aliso Viejo. For CGI work in neighboring regions, see our CGI service in Murrieta page or our CGI service in Nuevo page. If you’re on the valley floor or up against the foothills, we’ll come out and take a look.
Book Your CGI Service in San Bernardino Today
If your CGI cabinets are peeling, your toe kicks are swelling, or your countertop seams are opening up, don’t guess. Call (833) 756-5936 to schedule your free estimate. We’ll inspect the substrate, tell you what’s salvageable, and give you a written line-item quote for the work, whether it’s a reface in 92405, CGI in Rialto, or a full remodel on a foothill lot.
Written by Nolan Driscoll, Owner at Iron Beam Contractors, serving San Bernardino and the surrounding foothill communities.