Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
GAF Construction in Ben Lomond, CA | Iron Beam Contractors
Iron Beam Contractors provides independent Brookdale GAF service and roofing installation and repair across Ben Lomond, CA, serving the 95005 zip code and the surrounding San Lorenzo Valley. We’re not a manufacturer affiliate or a corporate dealer, which means every recommendation we make about your roof is based on what the decking, flashing, and ventilation actually tell us, not on what a catalog says. The one thing that makes our GAF work different in Ben Lomond is simple: we build every roof assembly knowing it sits under a redwood canopy that never fully dries, on a steep lot that never fully stops moving, inside a fire zone that never stops being reviewed. Call (833) 756-5936 for a straight read on your roof.
Why Ben Lomond Residents Choose Us for GAF Service
We work on GAF in Lompico and other steep-slope systems up and down the San Lorenzo Valley year-round, so we know how Timberline shingles, WeatherWatch membrane, and GAF venting actually hold up when they’re shaded by redwoods, soaked by winter rain, and inspected under Santa Cruz County’s Chapter 7A requirements. Nolan Driscoll built Iron Beam Contractors on a principle that matters more in the mountains than anywhere else: tell the homeowner exactly what’s in the wall, or on the deck, before you open it up, not after. If the structure makes sense on paper, it’ll hold in the field. That’s why we re-deck first, flash second, and shingle last, and why we don’t hand you a pretty quote until we’ve actually walked the roof.
We carry GAF-brand starter, ridge, membrane, and ventilation components so the roof assembly stays matched as a system rather than a patchwork of whatever was left in the truck. We also stock common GAF-compatible flashing and vent details locally for faster turnarounds on Ben Lomond repair calls. As an independent contractor, our repair-versus-replace call is made for you, the homeowner, not for a manufacturer’s warranty department. If the deck is sound and the flashing is intact, a moss-hit roof is a repair and treatment job. If the underlayment has failed or the sheathing has gone soft, no shingle color or bundle count fixes a wet deck.
Styles & brands we work with
Common GAF Construction Problems We Solve in Ben Lomond
- Moss and organic growth on north-facing roof planes. Under the Ben Lomond redwood canopy, north-facing shingles stay damp far longer than sun exposure would suggest. Moss roots lift the shingle mat, hold moisture against the granules, and degrade the roof years ahead of schedule. We treat the growth, identify the moisture source, and re-shingle the affected planes rather than just scraping and hoping.
- Wind-driven rain intrusion at valleys, step flashing, and chimney counterflashing. Winter storms funnel up the San Lorenzo River corridor and hit older CZU-era cabins hard. Original flashing on many of these homes was patched with roofing tar or mismatched metal rather than rebuilt, and wind-driven rain finds those patches every season. We rebuild flashing runs properly, using GAF WeatherWatch at valleys and eaves where the old details failed.
- Underlayment failure on low-slope porch and addition roofs. Many Ben Lomond cabins have porch roofs and additions done decades ago with GAF Liberty or older felt laid directly over board decking with no ventilation. Wrinkling and fastener back-out follow, then leaks. We strip those low-slope sections and re-lay them as a proper self-adhered system with correct slope and drainage.
- Ember-entry and edge failure at rake and ridge. Roofs that predate current wildland-urban interface codes often have open gable vents and off-ridge vents that would never pass a Chapter 7A review today. Embers get in, rake edges lift, and the roof fails at the exact points where fire review looks hardest. We replace those vulnerable details with ember-resistant, WUI-compliant venting as part of every Ben Lomond re-roof.
- Soft sheathing at the eaves from trapped moisture. The same shaded, damp conditions that feed moss also soak the decking underneath, especially where gutter buildup or inadequate ventilation traps water at the eave line. We catch this during tear-off, not after the new shingles go down. If the sheathing is soft, we cut it out and re-deck before laying anything over it.
GAF Service in Ben Lomond: What Local Conditions Mean for Your Roof
Ben Lomond roofs sit under a redwood canopy that keeps north-facing planes shaded and damp, so moss and organic growth advance faster than sun exposure would suggest. That’s true in Boulder Creek and Felton GAF service areas too, but here’s what’s specific to Ben Lomond: the same parcels that trap moisture under the trees also fall inside the CAL FIRE wildland-urban interface, which means our GAF assemblies have to solve both problems at once, not sequentially. We pair moss-resistant shingle lines with Chapter 7A ember-resistant vents as a single decision, because a roof that sheds moss but lets embers through the gable vents won’t clear Santa Cruz County’s fire review, and a roof that passes fire review but rots under moss in five years isn’t much use either. Off Love Creek Road, where the canopy is thick and the lots are steep, this combined treatment isn’t an upsell. It’s the only way a roof survives long enough to age out of its warranty.
On a redwood-shaded cabin off Love Creek Road, our crew tore off two layers of aging three-tab over 1x board decking and found the north plane soaked and moss-rooted with soft sheathing at the eave. We re-decked the bad runs, laid GAF Timberline HDZ over WeatherWatch at the valleys and eaves, and swapped the old open gable vents for ember-resistant WUI-compliant venting so the roof would clear Santa Cruz County’s fire review. That’s what a Ben Lomond GAF job looks like when it’s done right: the moisture problem handled, the fire problem handled, the roof warrantable as a system.
GAF Models & Products We Service in Ben Lomond
We install and repair the GAF lines that actually make sense in the Santa Cruz Mountains. GAF Timberline HDZ architectural shingles cover most Ben Lomond re-roofs, and we specify them with GAF WeatherWatch ice-and-water membrane at valleys and eaves where winter rain concentrates. For homeowners in the wildland-urban interface who need Class A fire rating without stepping up to a different brand, Mount Hermon GAF service areas use the same approach: GAF Timberline ArmorShield II Class A shingles get the job done. On older cabin and porch roofs with low-slope sections, GAF Liberty self-adhered membrane replaces the failed felt and board-decking systems we regularly tear off. We carry GAF-brand starter, ridge, and ventilation components locally so most Ben Lomond repairs don’t wait on a supply house run, and we substitute quality equivalents only where GAF doesn’t make the specific piece a roof needs.
Explore our full GAF sales & service capabilities across the region, including repair and replacement scope.
See the difference
Before
After
Before
After
Before
AfterGAF Service Pricing in Ben Lomond
What you pay depends on what the deck and flashing tell us during the estimate, not on a bundle count someone guessed from the ground. Here are the ranges we quote in Ben Lomond:
| Service | Price Range |
|---|---|
| Roof Replacement | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
| Metal Roof Installation | $15,000 – $40,000 |
| Tile Roof Repair | $600 – $2,500 |
Steep access, re-decking, and WUI venting upgrades all move the number, and we give you a written line-item quote before anything gets torn off. Estimates are free and come with a straight answer about whether repair makes more sense than replacement. Call (833) 756-5936 to set one up.
Serving Ben Lomond, CA — Our Local Coverage Area
We’re based in the Ben Lomond area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – GAF Construction in Ben Lomond
If your home sits inside the CAL FIRE wildland-urban interface, and most Ben Lomond parcels do, a Class A assembly is generally required to clear Santa Cruz County’s Chapter 7A review. GAF Timberline ArmorShield II is our go-to Class A shingle system for these lots. We also pay attention to the venting, because a Class A shingle field with open gable vents still fails ember review. Call (833) 756-5936 for an exact read on what your roof needs.
That’s the redwood canopy at work. The shade from the trees keeps north-facing planes damp for weeks after rain, and moss thrives in exactly those conditions, even when the roof looks dry from the ground. We treat the moss and address the moisture source, not just the staining. Call (833) 756-5936 to have us walk the roof and tell you what’s actually growing up there.
In almost every case, no, and in Ben Lomond specifically, we won’t do it. The older cabins we see on steep wooded lots often hide soft sheathing, failed underlayment, or old moss damage under the shingle layer, and a second layer just seals those problems in while adding weight the framing may not be sized for. We tear off to the deck, inspect what’s underneath, and rebuild from there. Call (833) 756-5936 to talk through what your roof actually needs.
The river corridor funnels wind-driven rain into the valley, which hits roofs at angles that find every weak flashing detail and every patched seam. We rebuild valleys, step flashing, and chimney counterflashing to handle that driven rain, and we lay GAF WeatherWatch at the eaves and valleys so the places that fail first are the best-protected spots on the roof. Call (833) 756-5936 for a storm-readiness check before the next system rolls through.
Repair addresses a specific failure: a lifted rake edge, a torn valley, a single leak around a chimney. Replacement means the roof system itself has reached the end of its useful life, whether that’s failed underlayment, widespread soft sheathing, or shingle mat degradation across the whole plane. We tell you which one you’re looking at based on what we find, not on what’s easier for us to sell. Call (833) 756-5936 and we’ll give you an honest assessment.
Service Areas Near Ben Lomond
Iron Beam Contractors serves Ben Lomond and the surrounding San Lorenzo Valley, including Boulder Creek, Felton, Brookdale, and Scotts Valley. We also run GAF roofing work down the coast to areas like GAF service in Bonny Doon and over the hill toward GAF service in Communications Hill. If your roof sits under redwoods anywhere in the valley or up the adjacent ridges, we’re already working nearby. For broader coverage, see our Ben Lomond service area page.
Book Your GAF Service in Ben Lomond Today
We’ll walk your roof, look at the deck, check the flashing, and tell you what’s actually going on up there, whether it’s a repair or a full GAF replacement. Estimates are free and come with a written line-item quote. Call (833) 756-5936 to schedule yours.
Written by Nolan Driscoll, Owner at Iron Beam Contractors, serving Ben Lomond and the San Lorenzo Valley.