Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Daly City, CA | Iron Beam Contractors
We’re Iron Beam Contractors, an independent general contractor providing Mr-Glass service across Daly City. We install, repair, and replace Mr-Glass shower enclosures in Daly City’s mid-century stucco homes, and the one thing that sets our work apart here is we know exactly what the fog belt does to glass hardware. If your Mr-Glass door is sticking, corroding, or leaking onto framing that’s already damp from the marine layer, call (833) 756-5936 before the rot spreads behind the tile.
Why Daly City Residents Choose Us for Mr-Glass Service
Most contractors in Daly City can hang a shower door. Far fewer can tell you why the hinges on your north-facing bath seize while the south-facing bath in the same house is fine. We’ve spent years inside Daly City’s 1940s through 1970s wood-frame stucco homes, so we understand how fog-driven moisture moves through these walls, how raised foundations shift out of square, and what that does to glass enclosures over time. Nolan Driscoll, our owner, learned the fundamentals through the Building and Construction Technology program at Santiago Canyon College and has spent the two-plus decades since framing and reinforcing structures across California. He built Iron Beam on one principle: tell the homeowner exactly what’s in the wall before you open it, not after. That’s how we approach every Mr-Glass job in Daly City. We’re an independent contractor, not an authorized Mr-Glass dealer, which means we recommend what actually works for your home rather than what a manufacturer program tells us to push. For more on how we work with the brand, see our Mr-Glass sales & service page.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Daly City
- Fog-belt corrosion on hinges, pivots, and rollers. North-facing bathrooms in Daly City sit against walls that stay damp for hours longer than south-facing ones. Mr-Glass hinges and sliding-door rollers on those walls pit, seize, and fail years ahead of schedule. We replace the hardware before the door becomes an eyesore or a hazard.
- Dried-out sweeps and curb seals leaking water. The constant moisture cycling in Daly City’s fog belt shrinks and cracks vinyl sweeps faster than inland homes experience. Water tracks onto the tile, then wicks into wood-frame walls already prone to rot. In a Daly City stucco home, a failing sweep is never just a drip.
- Out-of-plumb glass binding or cracking. Many Daly City homes sit on raised foundations over sand and fill. Framing racks over decades, alcoves go out of square, and a stock Mr-Glass panel that once swung true now binds against the curb. We re-templating for the settled opening instead of forcing hardware to compensate.
- Scale and etching from poor original venting. Daly City’s mid-century bathrooms were under-vented by design. Trapped moisture and condensation leave mineral deposits and etching on Mr-Glass panels far quicker than in a modern bath with proper exhaust. Sometimes a deep clean and seal work; sometimes the glass needs replacing.
- Hardware-only repairs on glass that’s already compromised. We frequently see Daly City homeowners pay for new rollers on glass that’s already etched, chipped, or out of spec. That’s throwing money at the wrong layer. We’ll tell you straight when a hardware swap is enough and when the panel itself is the problem.
Mr-Glass Service in Daly City: What Local Conditions Mean for Your Equipment
Daly City’s fog belt makes moisture exposure highly directional. The persistent marine layer off the Pacific keeps north-facing exterior walls damp far longer than south-facing ones, and the bathrooms behind those north walls are where original Mr-Glass seals and hardware fail years ahead of schedule. We scope replacement work accordingly. On a raised-foundation stucco home in Westlake, our crew tore out an original Mr-Glass semi-frameless slider whose rollers had seized and whose sweep had been leaking onto soft, damp framing for years. We re-squared and blocked the alcove, replaced the corroded hardware with genuine Mr-Glass pivots, and set a custom-templated frameless panel to the settled opening so the door swung true and the curb finally sealed. That’s Daly City work in a sentence: the enclosure is never just an enclosure, it’s a moisture management system sitting inside a fog-prone wall.
Mr-Glass Models & Products We Service in Daly City
We service Mr-Glass frameless fixed-panel and hinged shower doors, semi-frameless sliding enclosures, neo-angle corner units, and custom-templated glass for out-of-square alcoves. On parts, our approach in Daly City is simple: we use genuine Mr-Glass hardware wherever it’s still available, including hinges, rollers, handles, and seals. When a specific OEM part is discontinued, we match an OEM-equivalent aftermarket pivot or sweep rather than making a guess. For Daly City turnaround, we keep common hinge and roller hardware in stock locally so we’re not waiting a week on a shipment while your shower stays out of service. If the glass itself is etched or the opening has moved, we’ll recommend a re-templated panel over a hardware-only patch. Call (833) 756-5936 and we’ll walk you through what your specific Mr-Glass unit actually needs.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Daly City
| Service | Typical Range in Daly City |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Remodel | $9,000 – $28,000 |
What drives the cost in Daly City is how much the existing structure has moved and how much moisture damage sits behind the tile. A straight hardware swap on a square opening lands at the low end. A re-templated glass panel with alcove re-squaring and framing repair lands higher because that’s real structural work, not just glass. Every estimate starts with a site visit where we probe the wall, check for rot, and measure the opening against square. You get a written line-item quote before anything gets touched. Call (833) 756-5936 to schedule a free estimate.
Serving Daly City, CA — Our Local Coverage Area
We’re based in the Daly City area and know this community well, and we also provide Mr-Glass repair in Broadmoor and nearby neighborhoods. Use the map below to see our full service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Daly City
Daly City’s fog belt keeps exterior walls damp for hours every morning, and that moisture transfers into the wall cavities behind your bathroom. San Jose is inland and dry by comparison. North-facing Daly City bathrooms are the worst. The fix is usually replacing corroded hardware with genuine Mr-Glass parts and improving bathroom ventilation. Call (833) 756-5936 and we’ll assess your specific setup.
In most Westlake homes we’ve worked on, it’s the house. Raised foundations over sand settle differently across the footprint, framing racks, and the alcove goes out of square. The Mr-Glass enclosure was never the problem, it was installed into a moving structure. We re-templating for the settled opening and re-block the alcove so the door swings true. Call (833) 756-5936 for an exact assessment.
Yes, when the glass itself is sound and the opening is square, a hardware and seal replacement is a same-visit job in most cases. We use genuine Mr-Glass hardware where available and OEM-equivalent sweeps and pivots when the original is discontinued. If the glass is etched or the frame has racked, we’ll tell you before quoting and recommend the more durable fix.
It’s real, and it’s worse in Daly City than almost anywhere else on the Peninsula. The fog belt keeps wall cavities damp, and a failing Mr-Glass sweep adds direct water on top of that. We’ve opened shower walls in Daly City and found sheathing you could push a screwdriver through. Fix the sweep early, fix the ventilation, and the framing stays dry. Call (833) 756-5936 if you suspect water is getting behind your tile.
Usually yes, because those mid-century Daly City baths have compact footprints and a tub wall eats space visually. A Mr-Glass frameless walk-in opens the room. Expect $4,500 to $12,000 depending on alcove condition and whether we need to re-square the opening. The return is a shower that seals properly and doesn’t fight the fog. Call (833) 756-5936 for a measured quote.
Service Areas Near Daly City
Our Mr-Glass work in Daly City also reaches neighboring communities across San Mateo County and up the Peninsula. We regularly serve Daly City service area clients in Colma, Brisbane, South San Francisco, Pacifica, and across the 94014, 94015, 94016, and 94017 ZIP codes. If you’re near Mission District, see our Mr-Glass service in Mission District page. For Noe Valley, see Mr-Glass service in Noe Valley.
Book Your Mr-Glass Service in Daly City Today
If your Mr-Glass enclosure is sticking, leaking, or showing its age against Daly City’s fog, let’s get it fixed before the wall behind it pays the price. We also offer Mr-Glass in Brisbane and surrounding areas. Call (833) 756-5936 to schedule your free estimate. We’ll measure, probe, and quote it straight.
Written by Nolan Driscoll, Owner at Iron Beam Contractors, serving Daly City with independent Mr-Glass construction service.