Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Highland, CA | Iron Beam Contractors
We install, service, and repair Mr-Glass shower enclosures and glass systems across Highland as an independent contractor, not a manufacturer affiliate. What sets our Mr-Glass work here apart is simple: we know the WUI retrofit timeline east of the 210, and we know how Highland’s hard water and UV punish track hardware, seals, and hinges. So when we open up a Mr-Glass enclosure in a 1960s tract bath or a foothill custom, we already know what we’re going to find. Call (833) 756-5936 for a free estimate, and we’ll tell you exactly what’s in the wall before we touch a panel.
Why Highland Residents Choose Us for Mr-Glass Service
Most contractors treat a shower enclosure as a finish item. We don’t. A Mr-Glass frameless door is a structural glass system that has to stay true through seasonal expansion, shifting framing, and decades of mineral buildup. Our crews work on Mr-Glass sliding, neo-angle, pivot, and custom-cut panels every week across Highland service area homes, so we’ve seen the same failure patterns repeat in valley-floor tracts and foothill customs alike.
Nolan Driscoll, our owner, spent his early years at Santiago Oaks and grew up around the clay and grade shifts of this region. That matters because a shower door that drops a quarter inch in a Highland tract home is rarely the hinge’s fault. It’s usually the wall behind it. If the structure makes sense on paper, it’ll hold in the field. If it doesn’t make sense on paper, we fix it before we touch a beam. We bring that same sequencing to every Mr-Glass enclosure we install or repair.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Highland
- Mineral-locked sliding tracks. Highland’s hard water deposits calcium and grit inside Mr-Glass bottom tracks, and the rollers bind until the door won’t move without shoulder pressure. We pull the track, clean or replace the OEM-spec rollers, and rework the track bed so drainage doesn’t pool. This shows up constantly in 1950s – 1970s tract bathrooms on the valley floor.
- UV-shrunk gaskets and sweeps. Inland sun cooks the rubber on Mr-Glass door sweeps and curb seals until they crack and pull away from the glass. Water then wicks into the sill plate and stucco at the curb line. We see this in nearly every original-install enclosure older than eight years in Highland.
- Dropped frameless hinges on settled walls. Older Highland homes settle, and add-ons built to varying code eras move at different rates. When the tile or framing behind a Mr-Glass frameless hinge shifts even a few degrees, the door drops and glass-to-glass contact starts. We reset the hinge geometry and, where needed, re-shim the glass rather than telling you the door is shot.
- Tempered panel stress during WUI retrofits. East of the 210, fire inspectors flag wood-shake roofs and attic venting during escrow. That triggers tear-outs and retrofit work, and Mr-Glass panels often get handled and reinstalled in the middle of it. We coordinate that reinstall with the inspection timeline so the glass doesn’t sit unprotected or get chipped by another trade.
- Failed curb seals causing hidden rot. A Mr-Glass enclosure can look perfect from the outside while the sweep below the glass has been gone for a year. By the time the water stains show on the ceiling below, the curb framing is saturated. We’ve fixed this enough times to check the sweep on every service call, not just the ones where someone complained about a leak.
Mr-Glass Service in Highland: What Local Conditions Mean for Your Equipment
If you’re buying a home east of the 210 in Highland, your escrow punch list is likely to include the bathroom and the attic in the same line item. Fire inspectors flag original wood-shake roofs and the venting that feeds the attic, but they also flag bath fans that terminate wrong. So a Mr-Glass shower enclosure that needs a track rebuild or a hinge reset often gets done during the same window as an ember-resistant vent swap and a roof upgrade. Inspection timing drives our schedule more than parts availability does. That’s the part no generic Mr-Glass service page tells you, because they don’t know Highland’s escrow flow. We do. If your agent or lender says the WUI retrofits need to close before funding, call us early so the glass work lands inside the same permit window instead of pushing the close date back.
Mr-Glass Models & Products We Service in Highland
We work on the full Mr-Glass residential lineup: frameless sliding shower door systems, neo-angle and corner enclosures, pivot and hinged glass doors, and custom-cut panels for tub-to-shower conversions. Our parts approach is straightforward. We stock OEM-spec rollers, hinges, and seals for Mr-Glass systems because those are the components most likely to fail in Highland’s hard-water, high-UV environment. When an OEM part is discontinued or priced beyond its remaining lifespan value, we’ll tell you and offer a quality aftermarket equivalent instead. If the glass and framing are sound, we reseal and re-hang rather than sell a full replacement. This is also the basis of our Mr-Glass sales & service work across the region.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Highland
What you’ll pay depends on whether we’re repairing an existing Mr-Glass system or replacing it entirely. Track and roller rebuilds land at the low end. A full tub-to-shower conversion with a custom Mr-Glass panel costs more because it involves demo, waterproofing, tile, and glass fabrication. Here are the line items that apply to most Highland jobs:
| Service | Price Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
A free estimate gives you a written line-item number before we start, so you’ll know the cost of track replacement versus glass replacement versus a full re-install. Call (833) 756-5936 and we’ll come look.
Serving Highland, CA — Our Local Coverage Area
We’re based in the Highland area and know this community well, and we also handle San Bernardino Mr-Glass service and nearby communities. Use the map below to see our full service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Highland
Yes. We work on Mr-Glass shower enclosures in Highland homes going through WUI retrofits, including properties east of the 210 where fire inspectors flagged roof venting or wood-shake roofing during escrow. We also provide Mr-Glass service in Muscoy and surrounding areas. We coordinate the glass removal and reinstall around the inspection schedule so the bathroom work doesn’t delay a retrofit close. Call (833) 756-5936 to put your glass work on the same timeline as the rest of the punch list.
In Highland, the binding almost always comes from hard mineral water depositing calcium and grit inside the bottom track, which locks the rollers. UV exposure in this inland climate then shrinks the adjoining seals, compounding the problem. We disassemble the track, clean or replace the OEM-spec rollers, and rework the bed so water flows out instead of pooling. If the door resists even after cleaning, you’re looking at a track replacement, not a full enclosure replacement. Call (833) 756-5936 for an evaluation.
Yes. We convert tubs to Mr-Glass walk-in showers in Highland’s 1950s – 1970s tract homes regularly, and we offer the same Redlands Mr-Glass service for homeowners there. The main consideration in these older homes is whether the existing drain location and floor framing can support a curbless or low-curb design, and whether the original tub surround has concealed water damage that needs repair before waterproofing. We’ll open the wall, check the structure, and tell you what’s needed before any glass gets ordered. Estimates are free; call (833) 756-5936.
In Highland, frameless hinge loosening usually traces back to framing or tile movement behind the enclosure, not the hinge hardware itself. Older valley-floor homes settle, and additions built in different decades expand and contract at different rates. When the wall behind the glass shifts, the hinge angle changes and the door drops. We reset the geometry, re-shim where needed, and torque the hardware to the glass manufacturer’s spec. Call (833) 756-5936 if your door is dragging or glass is contacting glass.
If the tempered glass panels are free of chips, cracks, and deep scratches, and the framing is still square, repairs are almost always the better money. We replace rollers, hinges, sweeps, and seals with OEM-spec parts and re-hang the existing glass. Replacement makes sense when the glass is damaged, the framing has corroded through, or the curb framing underneath has rot that requires a full tear-out. We’ll show you the condition and give you both numbers before you commit. Call (833) 756-5936 for a free line-item estimate.
Service Areas Near Highland
We serve Highland and the surrounding foothill and inland communities, including Mr-Glass service in Fallbrook and Mr-Glass service in Crestline. For homes up the mountain or further into the valley, the same WUI and hard-water logic applies, and the same parts stock follows our crews. Call (833) 756-5936 and we’ll route a tech to your area.
Book Your Mr-Glass Service in Highland Today
If your Mr-Glass enclosure is binding, leaking, or sitting in the middle of a WUI escrow retrofit, don’t let it stall the project — whether you need help in Highland or Mr-Glass repair in Loma Linda. Call (833) 756-5936 for a free estimate. We’ll schedule the glass work around your inspection timeline and get the shower right.
Written by Nolan Driscoll, Owner at Iron Beam Contractors, serving Highland and the surrounding foothill communities.