Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in La Selva Beach, CA | Iron Beam Contractors
We provide independent Mr-Glass shower enclosure service across La Selva Beach, from roller and seal replacement to full frameless glass installs, and we’ve learned the hard way that hardware specified for inland homes fails fast in coastal air. We also handle Mr-Glass service in Aptos Hills-Larkin Valley with the same coastal expertise. The single biggest difference here is permit geometry: because La Selva Beach runs through county permitting plus California Coastal Commission review, we size Mr-Glass work to the existing opening whenever the glass and frame allow it. Call (833) 756-5936 and we’ll walk you through what your enclosure actually needs.
Why La Selva Beach Residents Choose Us for Mr-Glass Service
Mr-Glass sliding shower door systems are common in La Selva Beach’s mid-century beach cottages and 1970s – 80s second homes, and the models we see most are the Frameless Sliding Shower Door systems, Semi-Frameless Hinged Shower Enclosures, Neo-Angle corner enclosures, and custom-cut tempered glass tub and shower panels. Nolan Driscoll built Iron Beam Contractors on a principle he applies to every glass job here: tell the homeowner exactly what’s in the wall before you open it, not after. That matters in a coastal community where a shower enclosure swap can quietly turn into a jamb or framing change, which can then drag in county and Coastal Commission review. We’re an independent contractor, not affiliated with or authorized by Mr-Glass, so our recommendations come from what actually holds up a few blocks off the sand, not from a dealer program. Our Mr-Glass sales & service work follows one rule: use OEM components where the profile is still supported, and upgrade to marine-grade hardware where OEM spec was never built for salt exposure.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in La Selva Beach
- Pitted and chalked anodized aluminum top rails. The marine layer keeps frames damp for hours every morning, and the standard anodizing on older Mr-Glass bypass doors gives up first. We replace the rail with a corrosion-resistant profile and reset the hangers so the doors stop drag-rattling on the track.
- Corroded bottom guide rails and stiffened splash seals. Beach cottages near the sand line often have original inland-grade spec, and we regularly see bottom guides so corroded the bypass doors jump track or bind mid-slide. New guides plus marine-rated seals fix the glide and keep water where it belongs.
- Seized roller assemblies, not flat-spotted ones. Onshore wind drives fine grit into the bearings, so Mr-Glass rollers in La Selva Beach tend to go stiff before they wear out. We swap in stainless rollers and re-lubricate the carriages.
- Shrinking silicone and sweep seals pulling away from stucco and tile jambs. Fog-moisture wicks behind the enclosure and stains the surround over time. We cut out the old bead, re-seal with a coastal-grade silicone, and reset sweeps so the joint stays closed.
- Doors drifting out of square as sand-dune soils settle. In beach cottages where the subfloor has shifted a fraction over decades, the enclosure frame can rack and the glass starts binding. We shim and re-plumb within the existing opening so the panels meet cleanly without forcing a permit-triggering reframe.
Mr-Glass Service in La Selva Beach: What Local Conditions Mean for Your Equipment
Almost every La Selva Beach construction project runs through county permitting plus California Coastal Commission review rather than a city building department, and that shapes Mr-Glass work here more than most homeowners expect. A simple roller swap or seal replacement stays inside the enclosure footprint and moves forward the same week. But if a corroded jamb forces you into the wall, or a patio-side shower enclosure needs the opening widened, the job can pull in coastal review and suddenly look like a remodel. We keep Mr-Glass installs sized to the existing opening whenever the glass and frame allow it for exactly this reason. On a mid-century beach cottage off the sand side of La Selva Beach, our crew re-hung a semi-frameless Mr-Glass bypass door whose aluminum top rail had pitted and whose rollers had seized solid from fog-and-salt exposure. Similar Rio Del Mar Mr-Glass service calls involve the same salt-air damage patterns. We replaced the rail with a corrosion-resistant profile, swapped in marine-grade stainless rollers and new bottom guides, and re-sealed the jambs. The doors now glide with one finger, and we left the original tempered panels and opening untouched so no coastal permit trigger came into play. If the structure makes sense on paper, it’ll hold in the field. If it doesn’t make sense on paper, we fix it before we touch a beam.
Mr-Glass Models & Products We Service in La Selva Beach
We service the full range of Mr-Glass enclosures found across La Selva Beach service area homes: Frameless Sliding Shower Door systems, Semi-Frameless Hinged Shower Enclosures including Great Lakes – style bypass and pivot doors, Neo-Angle corner units for tight cottage bathrooms, and custom-cut tempered glass tub and shower panels. Our parts approach is straightforward: OEM Mr-Glass glass and frame components when the original profile is still supported, and marine-grade stainless rollers, guides, and seals when OEM replacements are bare steel or plain aluminum. For common La Selva Beach failures we keep corrosion-resistant top rail stock, stainless roller kits, and coastal-rated seals ready, so most enclosure re-hardware jobs don’t wait on a parts order. We specialize in Walk-In Shower Installation, Frameless Glass Shower Enclosures, and Walk-In Showers & Shower Remodeling.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in La Selva Beach
Here’s what Mr-Glass enclosure and shower work runs in La Selva Beach, with the range driven by opening size, glass spec, and whether the existing profile can carry new hardware or needs full replacement:
| Service | Typical Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Remodel | $9,000 – $28,000 |
What moves the number is whether we’re re-hardwaring an existing Mr-Glass frame, re-glazing a panel, or opening up the surround. A free estimate from us includes a written line-item scope and a straight answer on whether your job stays inside the existing opening or risks a permit trigger. Call (833) 756-5936 and we’ll price it plainly.
Serving La Selva Beach, CA — Our Local Coverage Area
We’re based in the La Selva Beach area and know this community well, with Mr-Glass in Aptos and nearby towns also in our service area. Use the map below to see our full coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in La Selva Beach
In La Selva Beach it’s usually both, but the salt-laden onshore wind is the accelerant. Fine grit works into the roller bearings and the marine layer keeps everything damp, so the assemblies bind before the wheels flat-spot. We diagnose on sight: if the track and carriers are salvageable, we re-hardware with stainless rollers and get the door gliding again. Call (833) 756-5936 and we’ll come inspect it.
Only if the work moves beyond the existing enclosure footprint. Retrofitting glass, rollers, seals, or a top rail inside the original opening usually stays exempt. If the jambs, framing, or opening size change, the project can fall into county and Coastal Commission review. We size work to the existing opening precisely so most La Selva Beach enclosure jobs avoid triggering that path. The same approach guides our Mr-Glass repair in Day Valley and throughout the county. Call (833) 756-5936 for a straight read on your specific bathroom.
Frameless enclosures win in La Selva Beach because there’s no anodized aluminum top track or wheel housing to pit and chalk. Semi-frameless bypass and pivot doors carry more metal, which means more surface area for salt-driven corrosion. That said, frameless panels depend on hinges and clamps that also need stainless or marine-grade spec. When we replace hardware, we upgrade to marine-grade stainless wherever OEM used bare steel or plain aluminum. Call (833) 756-5936 and we’ll tell you which spec your enclosure actually has.
Settlement is the usual culprit. La Selva Beach’s sand-dune lots shift seasonally with groundwater and drainage changes, and a cottage subfloor that has moved even a fraction of an inch can rack the enclosure frame until the silicone at the jambs tears. We re-plumb the glass within the existing opening, shim the low side, and re-seal with a coastal-grade product that flexes instead of tearing. If the movement is ongoing, we’ll flag it before reinstalling glass. Call (833) 756-5936 to schedule a look.
Yes, when the profile is still supported we order OEM Mr-Glass glass and frame components to match the original dimensions and edge detail. When the original frame is pitted through or the profile has been discontinued, we quote a replacement panel and re-hardware the enclosure to keep it serviceable in coastal air. The honest call: if the glass is chipped at the edge or the frame is structurally compromised, replacement is the right investment. Call (833) 756-5936 and we’ll give you an exact match-and-price answer.
Service Areas Near La Selva Beach
La Selva Beach is our home ground for coastal Mr-Glass work, and we also run enclosures and shower remodels into nearby Santa Cruz County pockets and over the hill. You’ll find us pulling corroded Mr-Glass track out of beach cottages in Mr-Glass service in Corralitos, handling full shower remodels in Mr-Glass service in Morgan Hill, and doing enclosure work up along Highway 1 into Aptos and Rio Del Mar.
Book Your Mr-Glass Service in La Selva Beach Today
We’re the Mr-Glass service team that actually works in La Selva Beach’s salt and sand, and we’ll tell you what’s failing, what it costs, and whether your project stays permit-simple. Call (833) 756-5936 for a free estimate and a straight answer.
Written by Nolan Driscoll, Owner at Iron Beam Contractors, serving La Selva Beach since 2009.