Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Lompico, CA | Iron Beam Contractors
We provide independent Mr-Glass installation and repair across Lompico, CA – frameless shower enclosures, walk-in showers, tub-to-shower conversions, and custom glass work. We also serve nearby communities with Mr-Glass in Brookdale. The thing that separates our Mr-Glass work here: we template on-site and stage materials at the driveway mouth because Lompico’s narrow canyon roads won’t let a delivery truck reach most cabins. Call (833) 756-5936 for a free estimate. Nolan Driscoll and the Iron Beam crew have been working San Lorenzo Valley properties long enough to know what this terrain does to a glass enclosure.
Why Lompico Residents Choose Us for Mr-Glass Service
We’re not a glass shop that also does construction, and we’re not a remodeler who dabbles in shower doors. We’re a General Contractor in Lompico that treats a Mr-Glass enclosure as structural work – because in Lompico, it is. Out-of-square walls, sloped floors, and redwood-era framing all put real stress on hinges, pivots, and glass edges. Get the plumb wrong and you get a door that sags, chipped edges, and water where it shouldn’t be.
Nolan Driscoll built Iron Beam Contractors on a simple rule: tell the homeowner what’s in the wall before you open it. In Lompico, that often means telling someone their 1950s cabin wall is 3/4″ out of plumb before we hang a frameless panel on it. That’s the difference between a shower that drains and seals properly, and one that weeps into the subfloor for three years before anyone notices. We handle Mr-Glass service as an independent crew – not manufacturer-affiliated, not authorized, just experienced with the brand’s hardware and glass specs.
Styles & brands we work with







Common Mr-Glass Construction Problems We Solve in Lompico
We see the same failure patterns on Lompico properties, year after year. Here’s what actually goes wrong with Mr-Glass enclosures up here, and why:
- Hinge and pivot corrosion from hard well water. Much of Lompico runs on wells, not municipal water. The mineral content is high, the damp is constant, and hardware seizes. We replace corroded Mr-Glass hinges and pivots with OEM parts where the enclosure is still sound, and we re-lubricate and re-seal hardware so it moves freely again.
- Sealed glass-to-frame joints mildewing in the shade. The redwood canopy keeps bathrooms from ever fully drying. Silicone gaskets that would last a decade in a sun-exposed suburban bath fail in three to five years here. We re-gasket and re-seal Mr-Glass enclosures with sealant specified for high-moisture, low-ventilation conditions, and we’ll tell you honestly if the wall behind the enclosure needs attention too.
- Door sag from out-of-square openings. Old Lompico cabins settle. Floors slope. Walls lean. A Mr-Glass door hung on an out-of-plumb opening stresses the hinge, sags, and chips the glass edge within a year or two. We template every opening on-site, shim and re-plumb where the framing allows, and only then hang the enclosure.
- Condensation etching and spotting on glass faces. Cold canyon air outside, warm shower steam inside – that differential condenses on glass and mirrors fast. On legacy Lompico homes with poor bathroom fans, the spotting turns to etching over time. We’ll assess whether the glass can be restored or needs replacement, and we’ll flag the ventilation issue because replacing the glass without fixing the airflow just means replacing it again in a few years.
- Water weeping under the curb onto the subfloor. On steep lots, a shower that wasn’t flashed correctly sends water downhill into the floor framing. We see this on Lompico cabins where someone installed a shower door years ago without addressing the pitch and flashing. Our repair includes re-flashing the curb and re-pitching the threshold so water sheds away from the wall.
That’s the work we do. Not just swapping glass – making the enclosure actually function in a damp, shaded, settling mountain house. If you’re dealing with any of these, call (833) 756-5936 and we’ll tell you what’s fixable before you spend a dime.
Mr-Glass Service in Lompico: What Local Conditions Mean for Your Equipment
Lompico sits in a steep, shaded canyon of the San Lorenzo River watershed, where damp winters and heavy redwood canopy drive rot, moss, and decay on everything – decks, siding, roofs, and especially shower enclosures that never get a chance to dry out. But the real constraint most people don’t think about until it’s too late is access. Because so many Lompico homes are on long private driveways and narrow single-lane canyon roads, glass enclosure panels and custom shower glass often have to be measured on-site and trucked in on smaller loads staged at the driveway mouth. A glass supplier in Santa Cruz or Scotts Valley won’t know that. We do. That’s exactly why a template-and-template-check install beats a pre-order-and-hope one here. We measure, template, then measure again. The glass arrives in a smaller truck. We haul it up the hill if we need to. That’s just how Mr-Glass work gets done in Lompico, and it’s why we don’t quote over the phone without seeing the property.
On a steep wooded lot off the Lompico Road corridor, we replaced a fogged, mildew-stained Mr-Glass sliding shower door on a redwood-era cabin whose out-of-square opening had cracked a hinge and let water weep onto the subfloor. We templated the opening on-site, staged the new 3/8″ tempered panel at the driveway mouth because the delivery truck couldn’t make the grade, then re-plumbed and re-flashed the enclosure to shed water away from the wall. The result was a flush-swinging frameless enclosure that finally dried out between showers. If the structure makes sense on paper, it’ll hold in the field. If it doesn’t make sense on paper, we fix it before we touch a beam.
Mr-Glass Models & Products We Service in Lompico
We install and service the full range of Mr-Glass residential glass lines, including frameless glass shower enclosures with 10mm (3/8″) tempered panels, sliding and hinged shower door systems, mirror and specialty glass units, and custom-cut glass panels and shelves. Our parts approach is straightforward: we favor OEM Mr-Glass hinges, pivots, and seals for exact fit and long-term support. When an OEM size can’t match an odd cabin dimension – and Lompico has plenty of those – we specify quality aftermarket tempered panels cut to the template. We’ll re-hinge, re-gasket, and re-seal a sound enclosure honestly rather than upsell a full replacement when the glass and frame are still solid. That’s the repair-vs-replace judgment you want on your side. See our Mr-Glass sales & service overview for more on what we cover.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Lompico
Pricing for Mr-Glass work in Lompico follows the same market reality as the rest of our service area, including Mr-Glass repair in Felton. What drives cost here specifically: access (steep driveways, narrow roads, smaller trucks), the condition of the existing framing (out-of-square walls take more prep), and the scope of surrounding tile and waterproofing work. A free estimate from us includes a site visit to measure, check plumb and framing, and give you a written line-item quote. No phone guesses.
| Service | Price Range |
|---|---|
| Frameless Glass Shower Enclosure (Walk-In Shower Installation) | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Small Bathroom Remodel | $5,000 – $12,000 |
These ranges reflect Lompico’s mix of older cabins and steeper lots. A straightforward tub-to-shower conversion in a recently leveled house lands on the low end. A frameless enclosure with tile surround work and waterproofing in a settling cabin with a long driveway lands higher. Call (833) 756-5936 to schedule your free estimate and get an exact number.
Serving Lompico, CA — Our Local Coverage Area
We’re based in the Lompico area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Lompico
Redwood canopy shade keeps bathrooms damp, and without adequate ventilation, the gaskets and seams on a Mr-Glass enclosure stay wet and breed mildew fast. The fix is usually a combination of better bath ventilation, re-gapping and re-sealing the glass-to-frame joints with a high-moisture sealant, and addressing any water weeping at the curb. We’ll tell you exactly which factor is driving the problem before we quote. Call (833) 756-5936 for a free assessment.
Yes, but not by measuring and ordering blind. Out-of-square walls require on-site templating, shimming, and re-plumbing before the glass goes in. If the wall is too far out, we’ll frame or fur it out to get the opening square enough for a frameless panel to hang safely. That prep work is a normal part of Mr-Glass installation in older Lompico homes – not an extra we spring on you later.
Yes, and it’s one of the biggest scheduling realities up here. Many Lompico driveways are single-lane with tight switchbacks, and delivery trucks can’t make the grade. We plan for smaller loads, stage glass at the driveway mouth, and carry panels up by hand when needed. We factor that logistics into our quote and our schedule from day one.
Usually, if the glass and frame are still sound. We’ll re-hinge, re-gasket, and re-seal a Mr-Glass enclosure rather than upsell a full replacement when the only problems are corroded hardware or failed seals. If the glass is etched, chipped, or structurally compromised, replacement is the right call. Either way, we’ll show you the damage and explain the numbers. Call (833) 756-5936 for an honest estimate.
Yes. As a full-scope general contractor, we handle the waterproofing, tile, surround framing, and plumbing rough-in around every Mr-Glass enclosure we install, and we bring that same expertise to Mr-Glass in Mount Hermon. One crew, one point of contact, one warranty. In Lompico’s damp canyon conditions, that matters more than people realize – the waterproofing behind the glass is what protects the structure, not just the glass itself.
Service Areas Near Lompico
From our Lompico base we serve the surrounding San Lorenzo Valley and beyond. You’ll find us in Ben Lomond, Brookdale, Felton, Boulder Creek, and Scotts Valley – and for Mr-Glass work, our crews also cover Mr-Glass service in Ben Lomond and Mr-Glass service in Seven Trees. Full Lompico service area details are available on our local page.
Book Your Mr-Glass Service in Lompico Today
If you’re in Lompico and your Mr-Glass enclosure is leaking, sagging, mildewing, or just ready for replacement, call (833) 756-5936. We’ll schedule a free site visit, measure your space properly, and give you a written quote. Same-day assessments are often available for Lompico homeowners.
Written by Nolan Driscoll, Owner at Iron Beam Contractors, serving Lompico and the San Lorenzo Valley.