Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Pomona, CA | Iron Beam Contractors
Mr-Glass shower enclosures and glass products in Pomona are serviced by our crews as an independent contractor, not a manufacturer affiliate. The difference matters here because so much of Pomona’s housing stock runs pre-war and out-of-square, and Mr-Glass hardware failures in those bathrooms trace back to installation issues, not the product itself. We handle Mr-Glass repair and replacement across 91769, 91766, 91767, and 91797, reading the tempering, hardware, and sealing problems these units actually develop. Call (833) 756-5936 for a free estimate.
Why Pomona Residents Choose Us for Mr-Glass Service
Most glass companies in Pomona will quote you a new enclosure before they’ve measured the opening. We don’t work that way. Our Mr-Glass service starts with the actual condition: pivot wear, sweep degradation, jamb sealing, and whether the curb is level. Nolan Driscoll, who runs Iron Beam Contractors, learned structural and construction fundamentals through the Building and Construction Technology program at Santiago Canyon College, then spent more than two decades framing and reinforcing everything from single-family additions to commercial tenant improvements. That background matters when a Mr-Glass pivot has wallowed out a jamb instead of just loosening. We match OEM hardware when a hinge or clip is proprietary, and use quality aftermarket seals and clips when the profile is standard. Pomona homeowners get a fix plan that fits the opening, not a canned upsell. We also offer full Mr-Glass sales & service for replacement units and new construction.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Pomona
- Pivot and hinge hardware seizing on 3/8-inch frameless doors. Pomona’s dry-season-then-wet-season swing loads mineral deposits onto hinge surfaces, and after a few years the pivot binds or the door drags. We replace the OEM hardware when the fitment is proprietary and re-square the jamb if it’s wallowed out.
- Bottom sweep and magnetic seal degradation causing water tracking. Older bungalow bathrooms in the Pomona core often have thresholds that are no longer level, so a worn sweep dumps water onto the floor instead of channeling it back into the pan. We replace the sweep and check the curb before recommending anything else.
- Tempered glass edge chipping near corners. Pre-war bathrooms were rarely framed square, and a Mr-Glass enclosure set into an out-of-square opening carries stress at the pane corners. Chipped edges mean replacement of the panel is the honest answer, not a hardware patch.
- Silicone and caulk failure at wall jambs and curb. Homes on shallow slabs and pier-and-beam floors in Pomona shift seasonally, and the caulk line is the first thing to fail. Water gets behind tile, and by the time you see staining the damage is already underway. We pull the old seal, prep the substrate, and re-seal with the right product for wet areas.
- Improper curb height on ADU and garage conversion showers. On deep alley-access lots in 91766 and 91767, rear ADUs and converted garages often get a shower with a non-standard curb. The glass gets cut to the wrong height, the sweep doesn’t engage, and water tracks onto the floor from day one. We re-set the curb and re-measure before installing glass.
Mr-Glass Service in Pomona: What Local Conditions Mean for Your Equipment
Here’s what most out-of-town glass companies miss about Pomona, unlike our Los Serranos Mr-Glass service. The deep, narrow lots in 91766 and 91767 with alley access have driven a wave of garage conversions and rear ADUs over the past decade. That means the Mr-Glass shower enclosures in those homes are frequently second or third bathrooms added into converted spaces, not factory-spec alcoves. The rough opening was probably cut by a framing crew working fast, the curb was formed by someone who was not a tile setter, and the glass was ordered to the original framing dimensions rather than the finished opening. So the enclosure starts its life with stress on the glass edges and a sweep that barely touches the curb. Homeowners then blame the product when the pivot fails or water tracks. The fix is usually not a new enclosure, it’s re-squaring the opening, re-setting the curb, and re-cutting the glass. If the structure makes sense on paper, it’ll hold in the field. If it doesn’t make sense on paper, we fix it before we touch a beam. That principle applies to shower glass the same way it applies to a load-bearing wall.
Mr-Glass Models & Products We Service in Pomona
Our crews service the full Mr-Glass residential line. We work on frameless sliding shower doors with 3/8-inch tempered glass, semi-frameless pivot and bi-fold enclosures, neo-angle corner units, and custom-cut frameless fixed panels with return panels. OEM hardware from Mr-Glass, hinges, pivots, handles, and sweeps, is stocked for common fitments so Pomona homeowners don’t wait on a manufacturer shipment for a simple pivot replacement. When the hardware profile is standard, we use quality aftermarket seals and clips. When the glass itself is chipped at the edge or the opening has shifted out of square, we tell you replacement is the honest answer before we patch hardware that will only fail again.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Pomona
| Service | Price Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
What drives cost in Pomona is the condition of the rough opening, not just the glass. An out-of-square pre-war jamb, a curb that needs re-forming, or a shower pan that’s failed all add labor and material before the enclosure goes in. Our free estimate includes opening measurements, curb evaluation, and a written line-item quote. Call (833) 756-5936 to schedule yours.
Serving Pomona, CA — Our Local Coverage Area
We’re based in the Pomona area and know this community well, and we also provide Mr-Glass in La Verne. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Pomona
If the pivot is loose but the jamb is sound, replacing the OEM hardware usually solves it, and that’s a repair, not a replacement. If the pivot has wallowed out the jamb, you’re looking at re-squaring the opening before new hardware goes in. We’ll tell you which one you have after measuring. Call (833) 756-5936 for an assessment.
Almost always, the caulk or sealant at the jamb has failed, or was never applied correctly in the first place. Pomona’s seasonal thermal movement on shallow slabs and pier-and-beam floors pulls at the seal line. We strip the old sealant, prep the substrate, and re-seal with a wet-area product rated for movement. If the glass is also out of square, the seal will fail again until that’s fixed.
Yes. Tub-to-shower conversions are one of our most common jobs in Pomona, especially in the 1900s – 1940s bungalow stock where the original tub is cast iron and the bathroom is small. We handle the demolition, drain relocation, pan installation, and the new Mr-Glass enclosure as one scope, and we also offer Mr-Glass repair in Montclair. Expect custom glass cutting because those old bathrooms are never square.
The dry heat itself doesn’t damage tempered glass, but the thermal swings and mineral-heavy water do stress hardware. Pivots loosen faster, sweeps dry and crack, and hard water buildup accelerates seal wear. Santa Ana winds don’t help either, pulling dust into window tracks and onto glass surfaces. Routine hardware checks catch these before they become water damage.
Shower replacement runs $3,000 – $8,500 in Pomona, and walk-in shower installation runs $4,500 – $12,000. The variable is always the opening, curb condition, and whether the pan needs work. Call (833) 756-5936 for an exact quote, the estimate is free.
Service Areas Near Pomona
Our Mr-Glass service extends beyond Pomona into the surrounding communities. We serve Los Serranos, Mission Viejo, Aliso Viejo, and Laguna Hills for shower enclosure and glass work. If you’re in a nearby area, we also handle Mr-Glass service in Ladera Ranch and Mr-Glass service in Coto De Caza.
Book Your Mr-Glass Service in Pomona Today
If your Mr-Glass shower glass is dragging, leaking, or the hardware is loose, call (833) 756-5936 to schedule a free estimate. We serve all of Pomona and the surrounding San Gabriel Valley, including Mr-Glass service in Claremont, with measurement, replacement, and installation handled by one accountable team.
Written by Nolan Driscoll, Owner at Iron Beam Contractors, serving Pomona and the San Gabriel Valley. Pomona service area.