Owens Corning Construction in Ben Lomond, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

Owens Corning Construction in Ben Lomond, CA | Iron Beam Contractors

Iron Beam Contractors provides independent Owens Corning roofing installation and repair across Ben Lomond, CA, and nearby communities including Owens Corning in Lompico. We’re not a manufacturer affiliate or authorized dealer, but we’ve spent years installing Owens Corning Duration, Oakridge, and Supreme shingle systems on mountain homes where redwood shade and winter rain punish roofs faster than sun-exposed lots ever will. If your Owens Corning roof is showing moss, granule loss, or edge damage, call (833) 756-5936 for a straight assessment and a free estimate.

Call (833) 756-5936

Why Ben Lomond Residents Choose Us for Owens Corning Service

Most roofing crews can nail down shingles. Very few understand how Owens Corning products actually behave under a redwood canopy that blocks sunlight for half the year. We do, because we’ve torn off enough moss-choked roofs in Ben Lomond to know exactly where these systems fail first. Nolan Driscoll built Iron Beam Contractors on a simple rule: tell the homeowner what’s in the wall before you open it, not after. That applies to roofs too. We show you the deck condition, the underlayment, the flashing details, and the shingle wear before we touch anything.

We’re a full-scope general contractor, which matters on Ben Lomond and Brookdale Owens Corning service jobs where roof work ties directly into drainage, retaining walls, and siding. One contractor, every phase. You don’t get a roofer who shrugs at the grading problem below the eaves. You get one accountable team.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Common Owens Corning Construction Problems We Solve in Ben Lomond

  • Moss and organic growth on north-facing slopes. Ben Lomond’s redwood canopy shades north-facing roof planes so heavily that moss colonizes shingles within a few seasons, even on newer Owens Corning systems. The moss traps moisture, lifts shingle edges, and accelerates granule loss. We remove it, repair the damage, and install zinc strips at the ridge to slow regrowth.
  • Granule loss and shingle cracking from debris-blocked drainage. Needles, cones, and small branches from the redwoods pile up in valleys and behind chimneys. Water backs up, soaks the Owens Corning shingles, and freezes or expands through the wet season. Shingles crack, granules slough off, and the underlayment starts to fail. We clear the drainage paths and replace compromised shingles with OEM Owens Corning stock.
  • Wind uplift and edge metal damage on exposed ridgelines. Dry, wind-driven fall conditions in the San Lorenzo Valley hit exposed ridge lines hard. We find shingles lifted at the corners, edge metal pried loose, and fasteners pulled out because the original install didn’t meet WUI fastening standards. We resecure or replace with proper Owens Corning materials and upgraded edge detailing.
  • Flashing failures on sloped sites. Ben Lomond homes sit on slopes where minor structural movement from grading and retaining wall shifts stresses shingle and flashing connections. Chimney flashing, step flashing, and headwall flashing pull away, letting water into the deck. We reseat and reseal flashing after addressing the underlying movement where we can.
  • Underlayment failure from trapped moisture. The combination of shade, rain, and organic debris means water sits against the Owens Corning WeatherGuard or felt underlayment far longer than it does on sun-exposed roofs. By the time shingles show visible damage, the underlayment is often already compromised. We inspect the deck and replace underlayment with Owens Corning OEM products when we repair these roofs.

Owens Corning Service in Ben Lomond: What Local Conditions Mean for Your Equipment

Here’s what most roofing advice misses about Ben Lomond: the redwood canopy shades north-facing roofs so heavily that moss and organic growth advance faster than sun exposure would indicate. A roof in Scotts Valley or Santa Cruz might go a decade before moss becomes a structural issue. In Ben Lomond, we’ve seen Owens Corning Oakridge shingles develop moss colonies within three to four seasons, especially off Glen Arbor Road where the canopy runs dense and uninterrupted. The shade blocks the drying cycle that shingles depend on. Moisture sits in the granule layer. Moss roots work under shingle tabs. Granules release in sheets during heavy rain. The underlayment wets through and never fully dries. That’s not a product defect; it’s a local condition that changes how Owens Corning roofs should be installed and maintained here. We spec enhanced ridge venting, ice-and-water shield at the eaves, and zinc strips on north-facing slopes for a reason. If your Owens Corning roof in Ben Lomond is showing moss or dark streaking faster than you expected, call us before the deck starts rotting underneath.

Owens Corning Models & Products We Service in Ben Lomond

We install and repair the Owens Corning product lines most common on Ben Lomond homes: Duration Series shingles with SureNail technology, Oakridge Series for cost-conscious replacements, Supreme Series for older cabin stock, and WeatherGuard underlayment. Our OEM-vs-aftermarket approach is simple. Shingles, underlayment, and accessories come from Owens Corning to maintain system integrity and warranty eligibility. Vents and flashing are selected case by case, using aftermarket components only when they meet or exceed CAL FIRE WUI standards. We keep common Owens Corning shingle colors and ridge cap stock available for fast repairs on Ben Lomond jobs, which cuts wait time when a storm blows through the San Lorenzo Valley. For broader context, see our Owens Corning sales & service page.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Owens Corning Service Pricing in Ben Lomond

Roof work in Ben Lomond carries mountain-lot variables: tear-off labor on steep slopes, disposal costs for old redwood-era decking, and occasional structural corrections before roofing can start. Here’s what we charge across typical Owens Corning projects:

Service Price Range
Roof Replacement $8,000 – $20,000
Roof Repair $400 – $1,800
Metal Roof Installation $15,000 – $40,000

Moss remediation, deck repairs, and enhanced WUI detailing may add line items, but you’ll see every cost before work starts. Written line-item quotes, fixed pricing with no change orders. Call (833) 756-5936 for an exact quote on your Ben Lomond or Owens Corning service in Felton; estimates are free.

Serving Ben Lomond, CA — Our Local Coverage Area

We’re based in the Ben Lomond area and know this community well, including Mount Hermon Owens Corning service. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs – Owens Corning Construction in Ben Lomond

Service Areas Near Ben Lomond

Iron Beam Contractors serves Ben Lomond and the surrounding Santa Cruz Mountains communities, including Ben Lomond service area coverage, plus Owens Corning work in Owens Corning service in Bonny Doon, Owens Corning service in Communications Hill, and nearby mountain and valley towns across Santa Cruz County.

Book Your Owens Corning Service in Ben Lomond Today

If your Owens Corning roof is showing moss, granule loss, or edge damage, call Iron Beam Contractors at (833) 756-5936. We’ll inspect it, show you what’s happening, and give you a fixed price. Free estimates, no pressure.

Written by Nolan Driscoll, Owner at Iron Beam Contractors, serving Ben Lomond and the Santa Cruz Mountains. If the structure makes sense on paper, it’ll hold in the field. If it doesn’t make sense on paper, we fix it before we touch a beam.

Need Construction help in Ben Lomond? Licensed & insured · Free in-home estimates response · free estimates
Call (833) 756-5936
Areas We Serve

Request a Free Estimate in Ben Lomond

Tell us what you need — Iron Beam Contractors responds fast. No obligation.

By sending this request, you confirm you have read our Privacy Policy and agree that you may be contacted via phone, email, or SMS about your request, including by the independent contractors we may refer it to.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch