Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Construction in Colma, CA | Iron Beam Contractors
We provide Colma Home Remodeling with independent PGT service across the area, and the one thing that sets our work apart here is that we read the ground before we read the window. Colma’s Colma Sands formation and cemetery easements mean a leaking PGT unit is often a flashing-and-settlement problem, not a glass problem. Our crews pull, reset, and re-flash PGT aluminum and vinyl units on commercial and residential buildings throughout Colma, with OEM parts where they matter and honest repair-vs-replace guidance. Call (833) 756-5936 for a free estimate.
Why Colma Residents Choose Us for PGT Service
We know PGT’s product lines from the Architectural Series vinyl single-hung to the commercial WinGuard storefront sliders that line El Camino Real. Nolan Driscoll, our owner, learned structural work through the Building and Construction Technology program at Santiago Canyon College, then spent two-plus decades framing and reinforcing everything from single-family additions to commercial tenant improvements. The PGT work we do in Colma gets handled by people who understand load paths, sill flashing, and settlement, not just sash swaps, which is why builders looking for a Colma General Contractor come to us. Our loyalty is to the building and the crew reading it, not to a dealer quota.
Colma has a residential pocket of a few hundred mid-century homes near the Daly City border, but the bulk of our PGT calls come from the commercial corridor: dealerships, mortuaries, columbaria, and retail pads. We stock OEM PGT rollers, weatherstripping, and glazing for the profile families most common on those buildings, and we keep quality aftermarket hardware for legacy units where PGT no longer stocks the profile. For PGT sales & service across the Peninsula, we’re the crew that shows up with the right parts and the right read on the ground.
Styles & brands we work with
Common PGT Construction Problems We Solve in Colma
- Fogged IGUs on older ThermaStar and Architectural Series units. Colma sits in the fog belt on the San Bruno Mountain gap. Cool, damp coastal air puts constant moisture against aging butyl edge seals, and once the seal fails, the glass fogs between the panes. We replace the IGU or the sash, and we’ll tell you honestly when the frame has corroded past the point where chasing the fog is cheaper than a swap.
- Corner and weep-channel moisture intrusion on vinyl PGT frames. Wind-driven drizzle off the gap hits commercial storefronts and residential windows for decades. When PGT vinyl frame corners and weep channels start letting that fog-belt moisture through, the fix is usually a proper re-flash and seal, not a full replacement. We check the rough opening before we blame the window.
- Pitting and corrosion on aluminum PGT storefront frames and sliding doors. Coastal salt, wet-dry cycling, and exterior-grade hardware reactions eat at aluminum threshold screws and frame channels along El Camino Real. We pull the affected hardware, treat the corrosion, and reset the frame with OEM or matched aftermarket components.
- Racked and binding sliders and casements. Colma’s sandy, gravelly Colma Sands soils and old quarry fill settle. When a PGT unit is set into an infill wall that shifts, the frame goes out of plumb and the sash binds. We re-shore the rough opening, reset the frame plumb, and re-install with fresh OEM rollers and weatherstripping.
- Below-grade storefront and window openings on infill lots. Any PGT opening cut below grade on a Colma commercial job can hit loose sandy fill or unmarked cemetery easements. We coordinate with the district and shore the excavation before the first frame comes out. This is not a place to freehand a window swap.
PGT Service in Colma: What Local Conditions Mean for Your Equipment
Colma is built on the Colma Sands formation, a former sand quarry and cemetery ground that runs beneath much of town. What that means for a PGT owner is simple: any excavation deeper than a few feet on an El Camino Real infill lot can hit loose sandy fill, old quarry debris, or unmarked grave easements. We’ve stood on mortuary office expansions where the original PGT aluminum storefront sliders were racking because the quarry-fill wall beneath them had settled, binding the frames and leaking fog-belt moisture at the sill. We pulled the units, re-shored and re-flashed the openings against the sandy subgrade, reset the PGT frames plumb with OEM rollers and weatherstripping, and sealed the thresholds before the winter rains closed the schedule window. If the structure makes sense on paper, it’ll hold in the field. If it doesn’t make sense on paper, we fix it before we touch a beam.
PGT Models & Products We Service in Colma
We work on the full PGT residential and light-commercial range: Architectural Series vinyl single-hung and casement windows, WinGuard impact-resistant aluminum windows and sliding glass doors, ThermaStar by PGT vinyl replacement units, and PGT Custom vinyl fixed and awning frames for commercial storefront infill. For anything under warranty or where matching sightlines matter, we use OEM PGT replacement sash, weatherstripping, rollers, and glazing. For legacy units where PGT no longer stocks the profile, we source quality aftermarket hardware that matches the sightlines without cutting corners on function. We don’t push replacement when a re-flash and seal will hold. But when an IGU is fogged and the frame is corroded, we’ll tell you the swap is the cheaper call.
See the difference
Before
After
Before
After
Before
AfterPGT Service Pricing in Colma
What you’ll pay depends on the unit, the opening condition, and whether the ground around it has shifted. A straight window replacement runs $4,500 to $15,000. Impact-rated PGT installation runs $8,000 to $25,000. If the issue is a flashing or roof junction problem rather than the window itself, roof repair typically falls between $400 and $1,800. Every estimate is free, and we write the line items so you know exactly what you’re paying for before work starts. Call (833) 756-5936 to get your number.
| Service | Price Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair | $400 – $1,800 |
Serving Colma, CA — Our Local Coverage Area
We’re based in the Colma area and know this community well, and we also offer PGT in Pacifica. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – PGT Construction in Colma
Yes, in most cases the frames can be pulled and reset without expanding the excavation past the existing rough opening. We coordinate with the cemetery district on any opening that sits near an easement, shore the sandy fill before we work, and keep the disturbance to the original footprint. If the rough opening itself has shifted, the conversation changes, but we’ll walk you through that before any ground is broken. Call (833) 756-5936 for a site assessment.
Colma’s fog belt exposure is stronger than Daly City’s for many buildings because of the San Bruno Mountain gap wind pattern and the cool marine air that sits over the town. That sustained moisture finds failing butyl edge seals faster. Once the seal fails and moisture gets between the panes, the IGU is done. We replace the sash or the glazing, and we’ll tell you whether the frame is worth saving. Call (833) 756-5936 and we’ll assess it.
Yes, frequently. The sandy, gravelly Colma Sands formation and the old quarry fill under much of Colma don’t hold standard anchors the way consolidated soil does. We spec engineered anchorage and often deeper embedment for PGT frames going into infill or below-grade openings. It’s a footing-and-framing question, not a window question, and it’s one of the reasons we’d rather bid the job after seeing the soil report than guess from the street.
Fog alone won’t wreck a properly installed PGT aluminum frame. The risk comes when threshold screws and exterior hardware sit in contact with coastal moisture and salts for years without proper treatment. We coat and isolate the hardware during install, and we build the flashing so fog-belt drizzle drains away from the frame, not into it. That’s the detail that separates a 10-year storefront from a 30-year one.
Yes, for the PGT profile families still in production, we source OEM-matched sash and frame components so the sightline is identical to the adjacent storefront. For legacy PGT storefront profiles that are no longer stocked, we find matched aftermarket extrusions and hardware that preserve the visual line. We’ll tell you honestly which one applies to your building before you spend anything. Call (833) 756-5936 for a free estimate.
Service Areas Near Colma
Most of our PGT work is in Colma, but we also handle jobs in Colma service area neighborhoods on the Daly City border, plus PGT service in Broadmoor and PGT service in Daly City for owners whose buildings sit on the same fog-belt and Colma Sands soil conditions. If your building is on the Peninsula and the ground shifts, we’ll read it the same way.
Book Your PGT Service in Colma Today
If your PGT windows or storefront are racking, fogging, or leaking along an El Camino Real building, call Iron Beam Contractors at (833) 756-5936 — we also handle PGT service in South San Francisco. We’ll assess the ground, the flashing, and the frame, then give you a written line-item quote. No change orders. No guesswork.
Written by Nolan Driscoll, Owner at Iron Beam Contractors, serving Colma and the surrounding Peninsula.