Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Construction in Montclair, CA | Iron Beam Contractors
We handle PGT window and door work across Montclair every week: replacements, impact upgrades, re-glazing, track and roller repair, and re-roofing jobs where window flashing has to be integrated into the new roof system. As PGT specialists, we know these units inside and out. What makes our PGT work different here is that Montclair is fully built out, so nearly every job is a swap inside an existing rough opening on a tight postwar lot, often tied to a room addition or garage-to-ADU conversion. We size, set, flash, and finish PGT units against existing stucco returns and narrow side setbacks instead of treating them like new-construction openings. Call (833) 756-5936 for a free estimate on PGT service in Montclair.
Why Montclair Residents Choose Us for PGT Service
We work on PGT units as a construction crew, not a broker. Nolan Driscoll, our owner, grew up in Friendly Hills and spent years framing and reinforcing remodels across Orange County before building Iron Beam Contractors on one principle: tell the homeowner what’s in the wall before you open it. That carries into every PGT service in Upland and Montclair job we run. We carry PGT-specific glazing, sash, rollers, seal, and screen parts so a slider off-track on a 1950s tract home doesn’t turn into a two-week parts wait. And because we’re independent, not manufacturer-affiliated, we can give a Montclair homeowner a straight answer when a unit is worth re-glazing versus when the vinyl itself is warped beyond saving. One contractor for the windows, the flashing, the stucco repair, and the roof tie-in if the job calls for it.
Styles & brands we work with







Common PGT Construction Problems We Solve in Montclair
- Sun-warped vinyl sliders on south and west walls. Montclair’s inland heat is unforgiving, and we regularly see PGT vinyl sashes that have warped from years of direct afternoon sun. The panel drags on the track, the interlock stops seating, and dust gets past the pile weatherstripping. On some units we can re-roller and re-seal; on badly warped frames the honest fix is replacement.
- Fogged WinGuard laminated glass from failed seals. Impact-rated PGT WinGuard units fail more often by seal breakdown than by breakage. Dry heat plus Santa Ana wind cycling eventually lets moisture into the interlayer, and you get the milky edge between panes. We re-glaze where the frame is sound, and replace where the sash is also warped or the aluminum is pitted.
- Whistling sliders and dust leaks during Santa Ana winds. Original builder-grade fuzzy pile and weatherstripping on older PGT sliders compresses in the hot-dry climate, then shrinks further. The door panel rattles at the jamb, and a Montclair wind event pushes fine dust straight through. We rebuild the interlock weatherstripping and re-set the panel so it actually seals.
- Pitted aluminum frames and failed caulk at the rough opening. On postwar Montclair homes with original PGT aluminum frames, we see pitting from decades of sun and smog, plus cracked caulk joints where the frame meets the stucco. Winter rains drive water past the flashing into the sheathing. We cut out the old caulk, re-flash, and re-seal the opening properly.
- Window-to-roof flashing failures on re-roofs. When a Montclair roof gets replaced, the existing PGT window flashing at the head and jambs often needs to be integrated with the new underlayment and drip edge. Roofer-only jobs miss this, and the leak shows up at the window a season later. We sequence the re-roof and window re-flash as one scope.
PGT Service in Montclair: What Local Conditions Mean for Your Equipment
Montclair is a small, fully built-out Inland Empire city with virtually no vacant land. That single fact shapes how PGT construction plays out here more than any brochure ever will. Most of the city’s housing stock is small-lot single-family tract homes from the 1950s through the 1970s, with attached garages, low-pitch or flat roofs, and original rough openings sized to the window products of that era. The same constraints apply to PGT in Claremont, another built-out city we serve nearby. So when a Montclair homeowner wants impact-rated WinGuard vinyl sliders or wants to convert a garage into an ADU, the PGT work is almost never a clean new-construction opening. It’s a swap inside an existing stucco return on a lot barely wide enough to hold the side setbacks, with material delivery and trash staging squeezed onto narrow residential streets. Near Holt Blvd, we’ve set new PGT units into 1960s walls where the original aluminum frames were pitted and the caulk joints failed. The work is quieter, more surgical, and more flashing-critical than anything you’d do on open land. We build the new unit to match the existing sill height, keep the stucco return intact, and make sure the side yard still drains and meets setback.
PGT Models & Products We Service in Montclair
We work on the PGT lines most common across Montclair’s postwar tract homes and newer remodels: WinGuard Aluminum impact windows and sliding glass doors, WinGuard Vinyl impact units, the Aluminum Series single-hungs and horizontal rollers, and the Vinyl Series sliders and casements. For parts, we use OEM PGT sash, rollers, screen frames, and weatherstripping wherever the profile is still in production so the unit keeps its original warranty and fit. On discontinued profiles where OEM parts are no longer practical, we use quality aftermarket glazing and hardware matched to the frame, and we’ll tell you that’s what we’re doing. We keep common PGT rollers, pile, and seal stock for the Montclair area, which cuts turnaround time on slider repairs and re-glaze jobs. Our full PGT sales & service scope covers everything from single-lite glass swaps to complete impact-window replacement and re-roof sequencing.
See the difference
Before
After
Before
After
Before
AfterPGT Service Pricing in Montclair
Here’s where Montclair PGT work typically lands. Every job is priced from a written line-item estimate, and the number you approve is the number you pay.
| Service | Typical Range in Montclair |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Replacement & Installation | $8,000 – $20,000 |
What drives the price is how many openings you’re replacing, whether you’re moving from builder-grade to impact-rated WinGuard, the condition of the existing rough opening and stucco return, and whether the roof-to-window flashing has to be reworked in the same job. A free estimate from Iron Beam Contractors includes the opening inspection, a straight read on repair-versus-replace, and the line-item numbers. Call (833) 756-5936 to schedule one.
Serving Montclair, CA — Our Local Coverage Area
We’re based in the Montclair area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – PGT Construction in Montclair
Yes, as long as the vinyl sash frames are still straight and the interlock seats properly. Fogged laminated glass means the seal between the panes has failed from dry heat and wind cycling, which is common on Montclair’s west-facing walls. We re-glaze in-frame with new energy-rated laminated units when the frame is sound. If the vinyl is warped or the aluminum is pitted through, we’ll tell you the re-glaze money is better spent on new units. Call (833) 756-5936 and we’ll put eyes on your specific windows before recommending either path.
We do. Garage-to-ADU conversions are one of the most common project types in Montclair because the city is built out and a garage is the easiest square footage to convert. The PGT side of that job means matching new window and door units to existing rough openings, keeping the sill heights consistent along narrow side yards, and not blowing the required setbacks. We handle the window and door install, flashing, stucco tie-in, and the roof work if the ADU also needs re-roofing.
The fuzzy pile and weatherstripping on your slider have compressed and shrunk in Montclair’s hot-dry climate, and the interlock isn’t seating anymore. When the Santa Ana winds push against the panel, air and dust slip through at the jamb and the meeting rail. The fix is replacing the pile with the correct PGT-spec density, re-setting the panel rollers, and adjusting the interlock so the panels actually meet pressure. Call (833) 756-5936 for an estimate on that repair.
It depends on where the frame is pitted and whether the glass package is still sealing. If you have pitting at the sill and failed caulk joints at the rough opening, and the windows are single-glazed builder units, replacement with modern energy-rated or impact-rated PGT WinGuard units usually makes more long-term sense than chasing repeated repairs on 30-year-old frames. If the frames are clean but the weatherstripping or rollers are worn, repair-first is the better spend. We’ll give you both numbers so you can decide with real math.
Yes, and we prefer it that way when both are failing. The window head flashing and the roof underlayment have to overlap correctly at every opening, and trying to coordinate two separate crews on a tight Montclair lot usually means the window flashing gets skipped. We sequence the roof first, set the new PGT units into the existing openings, then tie the flashing and stucco returns together so the whole assembly drains as one system. Call (833) 756-5936 for a combined scope and price.
Service Areas Near Montclair
We run PGT service out to the surrounding Inland Empire communities, including Los Serranos, Portola Hills, and the broader Pomona Valley edge. If you’re in one of the neighboring communities, our PGT service in La Verne coverage and PGT service in Ontario areas cover your side of the valley, and we’re set up for the same repair-first, replace-when-it-matters approach across the whole Montclair service area.
Book Your PGT Service in Montclair Today
Call (833) 756-5936 for a free estimate on PGT window replacement, impact installation, slider repair, or a combined roof-and-window project from our General Contractor in Montclair. We’ll inspect the openings, give you the repair-versus-replace numbers, and put a written line-item estimate in your hands.
Written by Nolan Driscoll, Owner at Iron Beam Contractors, serving Montclair and the Inland Empire since day one.