Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Construction in Mountain View, CA | Iron Beam Contractors
We provide independent PGT window and door service across Mountain View, from original aluminum sliders on 1960s ranchers to new WinGuard impact packages on Mountain View Home Remodeling additions. The thing that separates our PGT work here is that we sequence it around post-and-beam framing and the city’s seismic retrofit rules, not just the rough opening in front of us. If your PGT frame is racked, fogged, or leaking at the sill, call (833) 756-5936 and we’ll tell you honestly whether it’s a repair or a replace.
Why Mountain View Residents Choose Us for PGT Service
We read PGT frame profiles the way a framer reads a plan set. WinGuard aluminum, Architectural Series, Series 700 and 800 vinyl, the older builder-grade sliders you still find on original Mountain View homes, we work on all of them. Nolan Driscoll started Iron Beam Contractors on a simple rule: tell the homeowner what’s in the wall before we open it, not after. That discipline matters here because so many Mountain View houses hide radiant slab lines, shear-wall retrofits, and decades of questionable flashing behind the drywall.
We’re independent. Not a manufacturer-authorized dealer. That means we won’t steer you toward a new PGT line because there’s a spiff attached. We’ll repair a sound frame with OEM PGT sashes, rollers, and weatherstripping, and we’ll swap in quality aftermarket glass when only the IGU has failed. When the whole elevation is racked or corroded, we’ll tell you replacement is the smarter spend and specify the right PGT product for the opening. See our PGT sales & service scope for the full picture.
Styles & brands we work with
Common PGT Construction Problems We Solve in Mountain View
- Racked and out-of-plumb PGT sliders after seismic retrofit work. When an addition triggers shear-wall and hold-down requirements, the existing wall line shifts. Your PGT slider that latched fine for thirty years suddenly won’t catch. We re-square frames against the new structural line and replace rollers, tracks, or the whole frame if racking has bent the extrusion.
- Fogged dual-pane IGUs in original PGT vinyl windows. Mountain View’s wet winters push moisture against aging perimeter seals, and once the desiccant inside the IGU is saturated, the glass fogs permanently. We replace failed IGUs with quality aftermarket glass sized to the exact frame profile, which usually costs less than a full window swap.
- Aluminum sill and track corrosion on older PGT sliders. Decades of rain against untreated aluminum sills leaves white oxidation and pitting at the base of the track. Water tracks behind the frame and into post-and-beam wall openings. We replace corroded sill tracks with OEM PGT parts and re-flash the opening so the drainage plane actually drains.
- Face-flashed or screwed-in PGT installations that leak during heavy winters. Somebody set the window, ran a bead of caulk, and called it done. No integration with the WRB, no sill pan, no backdam. We pull the frame, flash it properly to the drainage plane, and reset the unit so water exits below the opening instead of through it.
- PGT frames disturbed by foundation movement. Expansive clay soil under Mountain View moves seasonally. That movement telegraphs through the framing and torques window and door openings. We diagnose whether the issue is the frame, the rough opening, or the foundation itself, then sequence the fix so you’re not paying for a window that’ll rack again next winter.
PGT Service in Mountain View: What Local Conditions Mean for Your Equipment
Here’s what actually drives a lot of our PGT work in Mountain View: the city’s building department requires a full seismic retrofit on most additions to homes built before the 1980s, and those retrofits run shear walls, hold-downs, and new framing directly past existing window and door rough openings. On a Waverly Park Eichler we opened up for a rear addition, the existing PGT aluminum slider had racked out of plumb and was leaking at the sill every wet season. The in-slab radiant heating pipes ran within eighteen inches of the opening. We located and protected those pipes before any foundation work, tied the new shear wall and hold-downs into the retrofit, pulled the old slider, and set a fresh PGT WinGuard impact slider flashed to the drainage plane. The opening ended up weathertight, the retrofit passed inspection, and the radiant slab never got touched. That’s the kind of sequencing you only learn by doing it here repeatedly.
PGT Models & Products We Service in Mountain View
We service the PGT lines you’ll find across Mountain View’s 94039, 94040, 94041, and 94042 zip codes, plus PGT in Sunnyvale. WinGuard aluminum impact windows and sliding doors show up on higher-end remodels and additions, Architectural Series on custom projects, Series 700 and 800 vinyl single-hungs and sliders on 1980s through early-2000s stock, and plenty of the older builder-grade aluminum sliders on original ranchers. When a frame is mechanically sound, we use OEM PGT replacement parts: sashes, sill tracks, rollers, weatherstripping. When the glass has failed, we use quality aftermarket IGUs matched to the frame profile. That mix keeps turnaround tight without compromising fit.
See the difference
Before
After
Before
After
Before
AfterPGT Service Pricing in Mountain View
Here’s what PGT work in Mountain View typically runs, depending on scope, access, and how much structural re-detailing the opening needs:
| Service | Typical Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Home Addition (scope affecting PGT openings) | $45,000 – $130,000 |
What moves the number: whether we’re repairing a sound frame or replacing a racked one, whether impact glazing is required by code, and whether the rough opening needs shear-wall re-detailing. Your free estimate walks the actual openings with you, line by line. Call (833) 756-5936 and we’ll schedule it.
Serving Mountain View, CA — Our Local Coverage Area
We’re based in the Mountain View area and know this community well, and we also serve as our General Contractor in Mountain View. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – PGT Construction in Mountain View
Yes, and we do it by locating and marking the radiant pipe runs before any cutting or demolition starts. The slab stays intact, and we work the new frame and flashing around the existing penetration. Call (833) 756-5936 for an exact assessment of your specific openings.
In most cases, yes. Mountain View’s building codes trigger full seismic retrofit requirements on additions to pre-1980s housing, and that retrofit runs shear walls and hold-downs past existing PGT door openings. That means your doors often need to be reset, re-squared, or re-flashed as part of the addition scope. We handle that sequencing in-house so you’re not coordinating a window contractor against a framer against an inspector.
Fogging is a failed IGU perimeter seal. Mountain View’s wet winters push moisture against the seal line, and once the desiccant inside the unit is exhausted, condensation forms between the panes permanently. We replace the failed IGU with quality aftermarket glass sized to your exact PGT frame profile. If the frames are still square and mechanically sound, there’s no reason to replace the whole window. Call (833) 756-5936 for a condensation check and a straight recommendation.
Mountain View sits on expansive clay soil that moves with seasonal moisture, and that movement jacks the wall line enough to throw a PGT slider out of square. The frame twists, the latch misses the keeper, and the weatherstripping gaps. We diagnose whether the slider needs re-squaring, new rollers, or whether the foundation itself needs drainage correction first. Fixing the window without fixing the cause just means you’ll call us again next winter.
We do, and an addition often changes the glazing and anchoring requirements at the new exterior wall line. When the structural retrofit re-frames the opening, the old PGT unit in that wall usually can’t stay as-is. We install PGT WinGuard impact windows and sliders flashed to the drainage plane and anchored to the new shear wall, so the opening meets both energy and structural code. Estimates are free; call (833) 756-5936 to book one.
Service Areas Near Mountain View
Our team works PGT service calls throughout the South Bay. What we learn on Mountain View’s Eichler stock applies directly to the ranchers in PGT service in Los Altos, where post-and-beam framing is just as common, and to the hillside homes in PGT service in Los Altos Hills, where slope-and-drainage conditions add another layer to every window and door opening. We also handle PGT work across Sunnyvale, Palo Alto, and Cupertino. If you live anywhere in the broader Mountain View service area, call us and we’ll let you know when we can get a crew to you.
Book Your PGT Service in Mountain View Today
If a PGT window or door is failing on your Mountain View home, call (833) 756-5936 for a free estimate or PGT repair in Loyola. We’ll walk the openings with you, explain what’s actually wrong, and give you a written line-item price before any work starts. One contractor, every phase.
Written by Nolan Driscoll, Owner at Iron Beam Contractors, serving Mountain View and the South Bay.