Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Construction in Moss Beach, CA | Iron Beam Contractors
We’re an independent contractor providing Therma-Tru door installation, repair, and replacement across Moss Beach. We’re not authorized, sponsored, or endorsed by Therma-Tru, and we don’t pretend otherwise. What separates our Therma-Tru work in Moss Beach from a generic door swap is that we treat every entry as an envelope job first: the salt fog and sideways Pacific rain mean the flashing, sill pan, and fasteners fail before the door face does. Call (833) 756-5936 for a free estimate on any Therma-Tru project in Moss Beach.
Why Moss Beach Residents Choose Us for Therma-Tru Service
We work on Therma-Tru doors every week in San Mateo County’s fog belt, which means we know how these slabs, sills, and weatherstrip systems actually hold up in salt-laden air rather than in a showroom, and we bring that same expertise to our Half Moon Bay Therma-Tru service. Nolan Driscoll, our owner, spent more than two decades framing and reinforcing structures before building Iron Beam Contractors on one principle: tell the homeowner exactly what’s in the wall before you open it. That matters in Moss Beach, where the same ocean wind that makes a deck pleasant in the afternoon drives rain sideways under siding and trim. We buy genuine Therma-Tru parts through distribution channels that keep the factory warranty intact, and we default to OEM sills, sweeps, weatherstrip, and glass-lite assemblies. If you want a door that stays square and seals tight through the fog season, call (833) 756-5936 and we’ll talk through what’s failing and what it’ll take to fix it right.
Styles & brands we work with
Common Therma-Tru Construction Problems We Solve in Moss Beach
- Bottom rails wicking moisture where the sill pan and threshold seal have degraded. In Moss Beach, wind-driven rain off the Pacific gets pushed sideways under the sill long before the slab itself shows wear. We see this on beach cottages where the original sill was set directly on the subfloor with no pan. Fixing it means pulling the door, installing a proper sill pan with upturned legs, and resetting the slab on a sealed bed.
- Surface and edge finish failure on fiberglass skins facing the ocean. Fog keeps the south and west faces wet for days at a time, so paint and stain break down at the stile-and-rail joints and around glass lites first. A Classic-Craft or Smooth-Star panel planted on a west-facing Moss Beach entry can show coating failure in two or three seasons if the original install used standard exterior paint instead of a marine-grade finish.
- Corroded hinges, lock sets, and threshold screws. Standard fasteners on beach-cottage entries pit and seize within a few seasons of salt spray. Hardware and sill seals often fail before the door panel does. We swap in stainless or coated fasteners and re-hardware the entry so the door operates cleanly instead of binding on rusty pin barrels.
- Weatherstrip and sweep compression loss on wind-exposed entries. When the jamb seals flatten out, fog damp and salt air infiltrate at the jamb, and older cottage and cabin entries start sticking and swelling. Most of the time this is a seal and adjustment fix, not a door replacement.
- Rotted rough openings behind the door trim. In Moss Beach, the opening rots out faster than the Therma-Tru slab does. We rebuild the king and jack studs, set new flashing, and hang the door in a square, dry opening rather than shimming a new slab into rot.
Therma-Tru Service in Moss Beach: What Local Conditions Mean for Your Equipment
Moss Beach’s ocean wind drives rain sideways under siding and door trim, so entry and patio door flashing and corrosion-resistant fasteners matter far more here than in the sunnier towns just over the hill, which is why our El Granada Therma-Tru service follows the same exacting standards. That’s why we treat a Therma-Tru swap here as a flashing and sill-pan job first and a door job second. On a low-slung beach cottage near the shoreline in Moss Beach, our crew pulled a storm-battered Fiber-Classic entry that had been pushing water sideways under the sill every winter. The bottom rail was soft and the hinges had seized solid with salt corrosion. We rebuilt the threshold with a proper sill pan and upgraded flashing, set a new Therma-Tru slab with marine-grade fasteners and stainless hardware, and caulked the trim line tight against the wind-driven rain. The owner’s entry has stayed dry through the fog season since. That’s the standard we hold for every door we touch in the 94038 ZIP, not just the damaged ones.
Therma-Tru Models & Products We Service in Moss Beach
We service the full Therma-Tru residential line: Fiber-Classic entry door series, Smooth-Star fiberglass door line, Classic-Craft door series, and Slim-Line glass-lite patio door systems. Our parts approach is straightforward. We default to genuine Therma-Tru sills, sweeps, weatherstrip, and glass-lite assemblies so the door keeps its factory warranty and the seals actually match the profile. Where salt exposure demands it, aftermarket seals we do use are marine-grade. On a solid slab, resealing and re-hardwaring is the right call. We only push full replacement when the bottom rail is soft or the rough opening itself is rotted and out of square. If you’re deciding between repair and replacement, call (833) 756-5936 and we’ll give you a straight assessment based on what we find when we open it up.
See the difference
Before
After
Before
After
Before
AfterTherma-Tru Service Pricing in Moss Beach
What you’ll pay depends on what’s failing and what’s around it. A door reseal and re-hardware runs less than a full replacement. If the opening is rotted, the framing repair adds to the total. Here are the line items we most often combine with Therma-Tru work in Moss Beach:
| Service | Price Range |
|---|---|
| Roof Repair | $400 – $1800 |
| Window Replacement | $4500 – $15000 |
| Impact Window Installation | $8000 – $25000 |
Every estimate is free, and we walk the property with you before we put a number in writing. You’ll get a line-item quote that shows exactly what’s included, what’s optional, and what we won’t do because it doesn’t need doing. Call (833) 756-5936 to schedule your free estimate. We’ll tell you what’s in the wall before we open it.
Serving Moss Beach, CA — Our Local Coverage Area
We’re based in the Moss Beach area and know this community well, and we also offer Pacifica Therma-Tru service. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Therma-Tru Construction in Moss Beach
Yes, if the install is done right. The door slab itself holds up well in Moss Beach. What fails first in this climate is the hardware, the sill seal, and the rough opening if the flashing wasn’t set correctly. We install Therma-Tru doors with marine-grade fasteners, stainless hardware, and a proper sill pan, which is what makes the difference between a door that stays dry for a decade and one that rots at the bottom rail by year six. Call (833) 756-5936 to talk through what your entry needs.
Because Moss Beach air carries salt spray and persistent fog moisture that settles on metal hardware and sits there for days. Standard zinc or brass-plated fasteners and hinge pins pit and seize within a few seasons, especially on west and south-facing entries. We replace them with stainless or coated hardware and use marine-grade fasteners on every exterior door we touch. If your door still opens cleanly but the hardware looks rough, call (833) 756-5936 for a re-hardware quote.
In Moss Beach, it’s usually the opening. The door slab itself is dimensionally stable fiberglass. When the jamb gets damp, the wood swells, or the threshold fasteners have corroded enough to let the sill shift, the door starts binding at the top or latch side. We check the rough opening, the sill fasteners, and the weatherstrip compression to find the true cause before we touch the slab. Call (833) 756-5936 and we’ll diagnose it on site.
Yes, and in Moss Beach that’s usually how it goes. We’re a Moss Beach General Contractor, not a door-only crew. When we pull a door and find rot in the trim, siding, or sheathing, we rebuild the opening, set new flashing, and reinstall the trim so the whole entry sheds water as one system. One contractor, every phase. Call (833) 756-5936 to schedule an inspection.
We do. Therma-Tru Slim-Line sliding patio door systems face the same salt and wind problems as front entries, often worse because they sit on decks exposed directly to ocean air. We replace rollers, rebuild thresholds, and repair or swap the entire sliding assembly when the track is too corroded to save. Call (833) 756-5936 and tell us what your patio door is doing.
Service Areas Near Moss Beach
In addition to Moss Beach, we provide Therma-Tru service in Montara, San Bruno, and the surrounding San Mateo County coast. For full coverage details, see our Moss Beach service area page. If you’re comparing options or want a broader look at what we handle, our Therma-Tru sales & service page covers the full scope.
Book Your Therma-Tru Service in Moss Beach Today
If your Therma-Tru door is binding, leaking, or shedding paint at the stile joints, don’t wait for the next fog season to make it worse. Call (833) 756-5936 to schedule your free estimate. We’ll walk the entry with you, tell you what’s failing, and give you a line-item quote for exactly what needs doing. If the structure makes sense on paper, it’ll hold in the field.
Written by Nolan Driscoll, Owner at Iron Beam Contractors, serving Moss Beach and the San Mateo County coast.