Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Foster City, CA | Iron Beam Contractors
We provide independent Foster City General Contractor cabinet and millwork service across Foster City, from kitchen remodels to bathroom vanity installations. What sets our work apart here is that we factor in the city’s engineered fill and bayfront air before we ever order a hinge or a drawer glide. If you own a home in Foster City with original CGI cabinetry, call (833) 756-5936 and we’ll tell you exactly what’s holding up and what it’ll take to make it right.
Why Foster City Residents Choose Us for CGI Service
Most contractors in Foster City know how to hang a cabinet. Few know the difference between a CGI Prelude door and a Serenade door, or which aftermarket glide will outlast the OEM part in salt air. We do. Nolan Driscoll founded Iron Beam Contractors on the idea that you tell the homeowner what’s in the wall before you open it, not after. That’s how we approach every CGI job here: we inspect the boxes, the hardware, the seals, and the moisture exposure, then we give you a straight answer about what to repair and what to replace. Our independence means nobody from a manufacturer is steering the recommendation. If the structure makes sense on paper, it’ll hold in the field.
Styles & brands we work with
Common CGI Construction Problems We Solve in Foster City
- Corroded hinges and drawer glides from marine fog. Salt-laden air off the bay works its way into cabinet hardware, especially on lagoon-front and waterfront streets in Foster City. Hinges bind, glides get gritty, and doors start sagging within a few years. We replace them with corrosion-resistant aftermarket hardware that holds up better than the original spec.
- Moisture swelling in cabinet boxes and vanities. Foster City sits on engineered fill with high groundwater. Without a proper moisture barrier and an elevated base, water wicks up into MDF cabinet boxes and delaminates the finish. We see this constantly on homes built in the 1960s through the 1980s.
- Failing particleboard shelves in original CGI cabinets. Those 1960s-to-1980s planned-community homes in Foster City still carry original particleboard shelving that sags under normal dish loads. We swap in plywood or reinforced shelving that holds a full set of plates without bowing.
- Drafty exterior doors and window seals. CGI exterior products, particularly older door frames and window surrounds, degrade quickly in Foster City’s salt air. Seals shrink, gaskets crack, and the frame starts letting in drafts. We re-seal and, where needed, rebuild the rough opening to stop air and water intrusion.
- Outdated cabinet layouts that don’t fit how people live now. A lot of Foster City kitchens still have the original 1970s cabinet configuration: shallow upper boxes, blind corners, no pull-outs. We reface or replace those runs with CGI’s current Prelude and Custom Collection lines, configured for how kitchens actually get used.
CGI Service in Foster City: What Local Conditions Mean for Your Equipment
Foster City is built on engineered fill around a lagoon system. That single fact changes everything about how CGI cabinets and vanities perform here, and it’s the reason we start every installation with a moisture barrier and an elevated base. On a lagoon-front home in the Shell Cove neighborhood, we replaced a failing CGI kitchen cabinet run that had swelled from years of high humidity and groundwater wicking. Our crew installed new moisture barriers and adjustable stainless-steel legs, then set new CGI Prelude cabinets with corrosion-resistant hinges. Two winters later, the cabinets are still square and the doors close smoothly. Flatland contractors from outside the bay often skip that step, and they get callbacks after the first heavy rain. We’d rather do it once, right, the first time. If you live near Shell Cove or along the lagoon system, this matters more than any cabinet style you pick.
CGI Models & Products We Service in Foster City
We work on the full CGI lineup: the Prelude series, the Serenade series, the Custom Collection, and the Estate series. That covers everything from older 1980s Prelude boxes to current Custom Collection vanities. For CGI sales & service, we source OEM CGI parts when an exact match is required, but for hinges, glides, and seals we often specify higher-grade aftermarket components that outperform the original hardware in Foster City’s salt-air environment. We keep fast-turnaround inventory for common Foster City applications, so you’re not waiting two weeks for a hinge that should have been swapped yesterday.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Foster City
Here’s what CGI work typically runs in Foster City, depending on scope and condition. A full kitchen remodel usually lands between $14,000 and $45,000. Cabinet installation alone runs $4,000 to $13,000. Full bathroom remodeling with new CGI vanities falls between $9,000 and $28,000. The price moves based on how much moisture remediation the site needs, whether we’re matching existing CGI lines, and how much of the original structure is salvageable. We give written line-item quotes and we don’t change the number after work starts unless you change the scope. Call (833) 756-5936 for a free estimate on your Foster City project.
| Service | Typical Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Full Bathroom Remodeling | $9,000 – $28,000 |
Serving Foster City, CA — Our Local Coverage Area
We’re based in the Foster City area and know this community well, and we also provide CGI in Redwood Shores. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Foster City
For a straight cabinet swap, no. Foster City doesn’t require a permit to remove and replace cabinets in the same footprint. But if you’re moving plumbing, changing walls, or altering the electrical layout for a kitchen remodel, you’ll need city approvals. Foster City’s design-review process for additions is notoriously tight, and we handle the paperwork when the scope calls for it.
Salt-laden marine fog corrodes metal hardware and accelerates finish wear on exterior-facing cabinets, especially near windows and doors. Hinges and drawer glides are the first to go. We specify corrosion-resistant aftermarket hardware for Foster City jobs, which outlasts the OEM parts in this environment.
Yes. We match existing Prelude, Serenade, Custom Collection, or Estate lines whenever they’re still in production. For discontinued finishes, we work with refinishers who can match stain and sheen closely enough that the new run reads as original from across the kitchen.
Foster City’s high groundwater and winter rain cause moisture wicking into cabinet boxes and vanities, especially on fill lots near the lagoon system. Without an elevated base and a proper moisture barrier, the MDF swells and delaminates. We install both on every Foster City vanity job. Call (833) 756-5936 if yours are showing signs of swelling and we’ll assess what’s salvageable.
Most Foster City kitchen remodels with CGI cabinetry run four to eight weeks, depending on cabinet lead times and whether we’re doing any structural or moisture remediation. Refacing and hardware replacement go much faster, often one to two weeks. Call (833) 756-5936 and we’ll give you a realistic schedule for your specific project.
Service Areas Near Foster City
We also serve Foster City service area and the surrounding region. For CGI work in the hills above the bay, see CGI service in Highlands-Baywood Park. On the coast side, we handle CGI service in Half Moon Bay. We handle jobs in Laguna Woods, Mission Viejo, and Aliso Viejo as well.
Book Your CGI Service in Foster City Today
Your Foster City home deserves a general contractor who knows CGI products and understands what this city’s fill lots and salt air do to them, and we also offer San Mateo CGI service. Call (833) 756-5936 to schedule a free estimate, and we’ll walk you through exactly what your cabinets need.
Written by Nolan Driscoll, Owner at Iron Beam Contractors, serving Foster City and the surrounding area.