Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Redwood Shores, CA | Iron Beam Contractors
We provide independent CGI service across Redwood Shores, from full kitchen remodels to our Home Remodeling in Redwood Shores and cabinet refacing to quartz countertop work. What makes our CGI work here different is simple: we plan for the water. Redwood Shores sits on former salt ponds, and that means slab moisture, marine air, and fill-ground settlement shape every cabinet box and countertop seam we touch. If you’re pricing a CGI kitchen or bath project, call (833) 756-5936 for a free estimate.
Why Redwood Shores Residents Choose Us for CGI Service
We’ve specified, installed, and repaired CGI cabinetry and countertops across the Peninsula long enough to know how the product lines actually behave in bayside conditions. We’re an independent contractor with no manufacturer affiliation, so our recommendations come from field experience rather than a dealer agreement. Since we also handle CGI sales & service at the general contracting level, we see the full lifecycle of these products, from initial install to the failure modes that show up five or ten years later. Nolan Driscoll, our owner, built Iron Beam Contractors on telling homeowners what’s inside the wall before we open it. That matters in Redwood Shores, where what’s behind the cabinet face is often damp substrate nobody planned for in the 1990s.
Styles & brands we work with
Common CGI Construction Problems We Solve in Redwood Shores
- Swollen and delaminating cabinet doors on north-facing walls. Bayside fog keeps relative humidity high on shaded elevations, and CGI thermofoil door faces start to lift and peel when that moisture never fully dries. We see it most on two-story stucco homes where the kitchen runs along a north exterior wall.
- Quartz island slabs cracking at unsupported overhangs. Redwood Shores fill ground settles unevenly over time. When the slab beneath an island shifts even a quarter inch, the cold joint in a CGI quartz top becomes a crack. We reinforce the substrate and add proper support before setting new stone.
- Toe kicks and cabinet bottoms wicking moisture from the slab. On salt-pond fill with no vapor barrier, water moves up through concrete year-round. Lower cabinets sit in that moisture and the particleboard boxes eventually soften and smell musty near the floor.
- Corroded hinges and drawer glides near exterior doors and under-window walls. Marine air carries salt. Metal hardware on cabinet runs close to patio doors or beneath kitchen windows corrodes faster in Redwood Shores than it would three miles inland.
- Failed seals and fogged glass on exterior CGI products. The damp marine cycle stresses weather stripping and glazing seals, especially on older 1980s and 1990s installations that were never resealed after original construction.
CGI Service in Redwood Shores: What Local Conditions Mean for Your Equipment
Because Redwood Shores sits on former salt ponds, slab-on-grade floors here pull moisture up through the concrete year-round. A CGI in San Mateo kitchen or bath job in this city needs a vapor barrier and moisture-rated substrates under cabinets and vanities before any box goes in, a step that inland Peninsula remodels usually skip. On a 1990s two-story stucco home in the Redwood Shores lagoon-side tracts, we tore out a CGI frameless kitchen where the north-facing wall cabinets had swollen toe kicks and delaminated thermofoil doors from years of marine air. We dried and sealed the slab, installed a vapor barrier and moisture-rated cabinet boxes with soft-close aftermarket glides, then set a CGI quartz island on a properly supported substrate. The owner kept the original layout, but the new run has stayed flat and tight through two wet winters. That’s the difference between installing CGI products and installing them for Redwood Shores.
CGI Models & Products We Service in Redwood Shores
We work on the full CGI in San Carlos range that shows up in Redwood Shores kitchens and baths: Euro-style frameless and tall cabinet lines, raised-panel solid-wood door series, quartz countertop slabs, and wood-look tile flooring. When a line is still in production, we use CGI OEM hinges, drawer slides, and matching door faces. When a discontinued CGI line would otherwise force a full tear-out, we switch to quality aftermarket soft-close hardware and moisture-resistant box materials. It’s a repair-vs-replace decision we make honestly: reface or repair when the boxes and slab are sound, replace when the substrate has taken on water. Bayside moisture in Redwood Shores will keep coming back, so a wet cabinet box is not a patch job.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Redwood Shores
Pricing for CGI construction work in Redwood Shores varies by scope, substrate condition, and how much moisture remediation the slab needs before we set cabinets. Here are the line-item ranges we quote most often:
| Service | Typical Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
Your free estimate includes a substrate inspection, moisture check, and a written line-item quote so you know exactly what’s behind the walls before work starts. Call (833) 756-5936 to schedule yours.
Serving Redwood Shores, CA — Our Local Coverage Area
We’re based in the Redwood Shores area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Redwood Shores
That’s slab moisture wicking up through the salt-pond fill under your home. In Redwood Shores, the high water table and fill composition mean concrete slabs stay damp year-round. Lower cabinets and toe kicks absorb that moisture when no vapor barrier was installed, softening particleboard and creating that musty smell. The fix is pulling the affected boxes, sealing and drying the slab, then reinstalling with a vapor barrier and moisture-rated substrates. Call (833) 756-5936 and we’ll inspect it before you spend on new cabinets that would just absorb moisture again.
For most interior remodels away from the shoreline, no BCDC review is required, but any structural change, new plumbing, or electrical work still needs standard Redwood City building permits. If your addition or deck is near the lagoon or bay, BCDC review and shoreline permits come into play. We scope this during the estimate and handle the paperwork as part of our Redwood Shores General Contractor scope. Call (833) 756-5936 and we’ll tell you exactly which permits your project triggers.
Reface when the cabinet boxes and the slab beneath them are sound, and only the door faces, hinges, or drawer glides have failed. Replace when the boxes have taken on water, because Redwood Shores moisture will keep returning to any particleboard that’s already compromised. We inspect the substrate before recommending either path. Call (833) 756-5936 for a straight answer on what’s salvageable.
It can, if the island or run sits over a fill-ground slab that has settled unevenly and the substrate under the stone wasn’t supported properly. CGI quartz is dense and durable, but it doesn’t flex with a shifting base. We level and reinforce the substrate before setting stone, especially on lagoon-side tracts where settlement is more pronounced. Call (833) 756-5936 and we’ll check your current slab and substrate before you invest in new stone.
Expect to address moisture before installation. Bathrooms in Redwood Shores hold more humidity than inland homes, and vanities on slab floors face the same wicking problem as kitchen cabinets. We specify moisture-rated vanity boxes, sealed toe kicks, and proper ventilation so your CGI or comparable vanity doesn’t start swelling within a season. Vanity installation typically runs $800 – $3,000 depending on size and existing plumbing. Call (833) 756-5936 for a quote that includes the moisture work, not just the cabinet.
Service Areas Near Redwood Shores
We serve all of Redwood Shores and the surrounding Peninsula, including Foster City, San Mateo, San Carlos, Belmont, and Menlo Park. For clients a bit further south or east, we offer CGI service in Belmont and CGI service in Foster City. If you’re in Redwood Shores proper, see our Redwood Shores service area page for coverage details.
Book Your CGI Service in Redwood Shores Today
If your CGI cabinets, countertops, or tile are showing moisture damage or cracked stone, call (833) 756-5936. We’ll schedule a free estimate, check the substrate, and give you a written quote that accounts for Redwood Shores conditions. One contractor, every phase.
Written by Nolan Driscoll, Owner at Iron Beam Contractors, serving Redwood Shores and the Peninsula since day one.