Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in San Carlos, CA | Iron Beam Contractors
We provide our Home Remodeling in San Carlos, from full kitchen remodels to cabinet refacing and quartz countertop installation. The one thing that makes our CGI work here different is that we’re not just hanging cabinets on a wall: we’re working on slopes, slabs, and 1950s ranchers where the framing underneath the finish line determines whether those cabinets stay square. Iron Beam Contractors handles the entire scope under one contract, and you can call (833) 756-5936 for a free estimate.
We’re independent, which means no manufacturer authorization and no affiliation with CGI. What we bring instead is install-level knowledge of CGI Euro-style frameless full-overlay cabinetry, shaker and raised-panel door lines, and CGI quartz and granite countertop programs, paired with two-plus decades of general contracting across the Peninsula. For a deeper look at our work with the brand, see our CGI sales & service page. Or if you’re still deciding whether a whole remodel makes sense, our San Carlos service area page covers the broader scope of what we handle here.
Why San Carlos Residents Choose Us for CGI Service
Most remodelers in San Carlos will order a CGI cabinet line and sub the install to whichever crew has an open slot. We build and install the runs ourselves, so the same team that shores up a settled slab also sets the cabinet boxes, scribes the fillers, and mounts the doors. Nolan Driscoll, our owner, grew up around Orange County’s clay and grade issues, and he brought that foundation-first mindset to Iron Beam Contractors. If the structure makes sense on paper, it’ll hold in the field. If it doesn’t make sense on paper, we fix it before we touch a beam.
That matters for CGI work because frameless cabinetry has no face frame to hide a crooked wall or a floor that’s drifted half an inch over sixty years. On San Carlos hillsides, those conditions are standard, not exceptions. We match CGI-specific hinges, drawer slides, and door profiles with OEM-equivalent hardware where the original spec is still made, and we use aftermarket components only when the OEM line is discontinued. We’ll also tell you honestly when a CGI box is sound enough to reface and when rebuilding the run is the cheaper long-term call. One contractor, every phase.
Styles & brands we work with
Common CGI Construction Problems We Solve in San Carlos
- Door and drawer fronts loosening and delaminating at the hinges. San Carlos homes without whole-house dehumidification see real seasonal swings, and CGI overlay cabinetry takes the brunt of it. The hinge screws back out of the particleboard core, the door sags, and the laminate starts to peel. We re-anchor with insert-style fasteners and re-align the reveals.
- Painted and thermofoil finishes checking, peeling, or yellowing near sink runs and range hoods. Steam and heat concentrate in exactly those spots, and older Peninsula kitchens often lack adequate ventilation. We’ll assess whether the door faces can be refinished or whether a new CGI door profile in a more durable finish makes more sense.
- Cabinet boxes and toe kicks wicking moisture. On San Carlos slab-on-grade ranchers, the original garage and kitchen slabs often meet un-vented crawl or dirt. Capillary moisture wicks up into the toe kick and the bottom of the cabinet box. We correct the drainage at the source before we replace or reface, otherwise the new run fails the same way.
- Quartz and granite tops cracking or debonding at seams. Un-reinforced post-WWII floor framing deflects under a loaded island, and the countertop flexes with it. On a hillside lot, that deflection can be worse. We reinforce the framing underneath before we set a new CGI top, because re-caulking a seam every six months isn’t a repair.
- Doors that rub and won’t stay closed after the wet season. Expansive clay in the San Carlos hills swells in winter and shrinks in summer. If the slab under your cabinets moves, the doors bind. This is seldom a hinge problem. It’s usually a foundation-and-drainage problem that happens to show up in the kitchen.
CGI Service in San Carlos: What Local Conditions Mean for Your Equipment
San Carlos’s downtown small-lot zoning and its ongoing tear-down/rebuild cycle on 1950s ranchers mean even a CGI kitchen or bath job here often starts with structural and seismic scope. Foundation bolting, shear-wall upgrades, and drainage redirection toward downhill neighbors are part of the permit conversation, because the city and its plan reviewers treat the remodel as part of the lot’s larger hillside-and-clay story. That’s a different world from flatland Redwood City, where a CGI service in Redwood City is mostly a kitchen remodel. In the Alder Manor area and upper San Carlos streets, the excavation and drainage plan for a rebuild often has to account for water that used to sheet across the old lot and now must be captured and redirected. That’s where permits and neighbor disputes live, and it’s why we sequence the structural work before the finish work. On a 1950s single-story rancher in upper San Carlos, our crew opened up a CGI full-overlay kitchen only to find the cabinet run sitting on a slab that had settled toward the downhill neighbor. We bolted and braced the affected framing, re-flashed and redirected the roof and site drainage, then installed new CGI shaker cabinets with a quartz island top. The doors that had been rubbing and delaminating for years now close clean and stay that way through the wet season. That’s not a cabinet repair story. It’s a San Carlos story that happens to end in a kitchen.
CGI Models & Products We Service in San Carlos
We work on CGI Euro-style frameless full-overlay kitchen cabinetry, the shaker and raised-panel door styles in painted and stained finishes, CGI quartz and granite countertop programs for kitchen and bath, and CGI vanity and bath cabinetry lines. Our parts approach is specific: match CGI hinges, drawer slides, and door profiles with OEM-equivalent hardware where the original spec is still produced, and reach for quality aftermarket only when the line is discontinued. We keep common CGI hinge styles and drawer slide lengths in local stock for faster San Carlos turnaround, which matters when a hinge has torn out and the door is hanging by one screw. Replacement doors and drawer fronts we order to match the existing run, which takes a little longer but keeps the kitchen looking like one project rather than a patch job.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in San Carlos
Pricing depends on the scope, the product line, and what we find underneath. A simple cabinet reface runs toward the bottom of these ranges, and a full kitchen remodel with structural work and a quartz island top lands toward the top, or beyond, depending on the site. What you’ll get is a written line-item quote, not a lump-sum number with no explanation.
| Service | Typical Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
The free estimate includes an in-person look at the site and the existing run, so we can tell you which line items apply and which ones don’t. Call (833) 756-5936 to schedule yours.
Serving San Carlos, CA — Our Local Coverage Area
We’re based in the San Carlos area and know this community well as your San Carlos General Contractor. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in San Carlos
If the cabinet boxes are sound and the problem is limited to door and drawer fronts, refacing is usually the better call. But on a San Carlos rancher, we’ll check the slab moisture and the framing under the sink run first, because delamination near the sink often traces back to a water issue, not a finish issue. If the boxes are wicking moisture or the floor has settled, refacing just wraps the problem in new doors. Call (833) 756-5936 and we’ll tell you which situation you have.
Frequently, yes. San Carlos plan reviewers treat remodels on hillside lots as part of the larger clay-and-drainage story, and un-reinforced 1950s ranchers often need foundation bolting or shear-wall upgrades once you open the wall. We pull the permits and sequence the structural work before the CGI cabinetry and counters go in.
Clay expands when wet and shrinks when dry, which means the slab under your cabinets can move seasonally. That movement shows up as doors that bind, seams that crack, and toe kicks that separate from the floor. We address the drainage and slab condition before we set cabinets, because a kitchen built square on moving ground won’t stay square.
In a lot of cases, yes. If the project touches structure, plumbing, or electrical, plan review and permits apply. If the scope is strictly cosmetic, like refacing existing boxes or swapping doors and drawer fronts, it’s often simpler. We’ll tell you before we start what San Carlos requires and we handle the permitting end to end.
Quartz is the practical choice. It’s non-porous, so the winter humidity and the steam around the range hood don’t soak in, and it doesn’t need the annual sealing that natural stone on the Peninsula typically sees. The catch is that the framing underneath has to be solid, because quartz will crack at a seam if the island deflects. Call (833) 756-5936 and we’ll look at the framing before we quote the top.
Service Areas Near San Carlos
We work throughout the San Carlos area and into the neighboring Peninsula communities. If you’re just over the line, we also provide CGI service in Redwood Shores and CGI service in Belmont, where the lots are flatter but the housing stock is from the same era. From blueprint to backyard, the same crew handles all of it.
Book Your CGI Service in San Carlos Today
If your CGI cabinets are binding, delaminating, or just tired, call Iron Beam Contractors at (833) 756-5936. We’ll schedule a free estimate, walk the site with you, and give you a written price that spells out what actually needs to happen. Built on real brands, real standards.
Written by Nolan Driscoll, Owner at Iron Beam Contractors, serving San Carlos and the surrounding Peninsula.