Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Boulder Creek, CA | Iron Beam Contractors
We provide independent Mr-Glass shower enclosure service across Boulder Creek, CA, from full frameless installations to hardware repair and tub-to-shower conversions. What makes our Mr-Glass work different here comes down to one thing most contractors miss: Boulder Creek’s narrow creek bridges, steep private driveways, and damp redwood-canopy housing stock change how glass gets measured, delivered, and anchored. If your Mr-Glass shower door sags, leaks, or binds, call (833) 756-5936 and we’ll tell you straight whether it’s a repair or a replacement.
As a full-scope general contractor, we work with Mr-Glass systems every day. Nolan Driscoll built Iron Beam Contractors on a simple rule: know exactly what’s in the wall before you open it. In Boulder Creek, that means understanding what’s behind the tile, under the sill, and holding up the floor. See our broader Mr-Glass sales & service page for our full brand coverage, and if you’re in the 95006 ZIP, you’re in our service area.
Why Boulder Creek Residents Choose Us for Mr-Glass Service
We’ve installed, adjusted, and replaced Mr-Glass hardware in mountain bathrooms long enough to know the fixtures don’t fail randomly. They fail because of what surrounds them: moisture, slope, old framing, seasonal movement. Mr-Glass frameless hinge-and-pivot doors and sliding bypass enclosures are solid products, but they need to be anchored into wood that’s actually sound, in a room that actually drains, on a floor that’s close to level. Most of the service calls we get in Boulder Creek aren’t glass failures. They’re hardware failures caused by the house moving around the glass.
We carry OEM Mr-Glass hinges, pivots, seals, and sweeps so repairs keep the original fit and warranty intact. When a model is obsolete and the factory part is gone, we use quality aftermarket hardware and say so before we install it. That’s the difference between a contractor who fixes your shower and one who just swaps parts. For the full list of neighborhoods and roads we serve, check our Boulder Creek service area page.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Boulder Creek
- Bottom pivots and hinge screws pulling loose. Older Boulder Creek cabins often have out-of-plumb framing or water-damaged sill plates behind the shower wall. The Mr-Glass pivot gets anchored into softened wood, works loose over a few seasons, and the door starts to sag until the glass binds on the curb. We sister new framing, re-set the pivot with stainless hardware, and re-hang the door square.
- Seals and sweeps cracked from redwood canopy humidity. Boulder Creek stays shaded and damp much of the year. Moss grows on the north side of everything. The rubber and vinyl components on Mr-Glass enclosures dry out, shrink, and split, letting water migrate behind the enclosure and into the wall cavity. We replace those seals with OEM parts and check the slope of the curb and the tile plane while we’re there.
- Corroded or seized hinges on older Mr-Glass models. Damp mountain bathrooms are hard on plated hardware. Cheaper factory hinges corrode, seize up, and transfer stress directly into the glass edges around the hinge cutouts. That’s how a sticky door becomes a cracked panel. We’d rather replace a hinge than a glass panel, and we’ll tell you which one you’re looking at.
- Cracked panels at hinge cutouts from structural movement. Boulder Creek homes on pier-and-post foundations or retained cut-bank sites move seasonally. If the Mr-Glass panel was shimmed or anchored tight against a shifting wall, stress concentrates at the hinge cutout and the glass eventually cracks. Proper installation means the panel floats with the structure instead of fighting it.
- Leaking bypass enclosures on sloped bathroom floors. Sliding bypass doors rely on a level bottom track. In old Boulder Creek cabins, the floor has settled and the track was shimmed with whatever was handy. Water pools, the track corrodes, and the doors jump. We re-level the track on a proper bed and replace the rollers.
Mr-Glass Service in Boulder Creek: What Local Conditions Mean for Your Equipment
Boulder Creek’s narrow one-lane creek bridges and steep private driveways often prevent full-size delivery trucks from reaching a job site. We learned this the hard way, so now we pre-measure custom Mr-Glass panels at the house, then schedule smaller loads or a pickup at a staging point on Highway 9 before the glass ever leaves the shop. A 3/8-inch tempered panel is heavy and awkward, and you get one shot to carry it up a wet, moss-slicked path without chipping an edge. We plan the route before we plan the glass.
Last winter we replaced a fogged, sagging Mr-Glass frameless shower enclosure in a redwood-sided cabin off Bear Creek Road. The original bottom pivot had pulled loose from a water-damaged sill plate, so we sistered new framing, re-set the pivot with stainless lag screws, and installed a new 3/8-inch Mr-Glass panel with fresh seals, then adjusted the door so it closed squarely despite the sloped bathroom floor. That’s the kind of sequencing you don’t get from a crew that only does glass and never looks at the framing behind it.
Mr-Glass Models & Products We Service in Boulder Creek
We service the three core Mr-Glass lines: Frameless Hinge & Pivot Shower Doors, Sliding Bypass Shower Enclosures, and 3/8-inch or 1/2-inch Heavy-Duty Custom Glass Panels. Our approach is simple. If the glass is intact and the hardware is failing, we repair. If the panel is chipped at a hinge cutout or the framing behind the pivot is rotten, we recommend replacing the enclosure. We keep common OEM Mr-Glass hinges, pivots, seals, and sweeps on hand for fast Boulder Creek turnaround, and we order custom glass cut to the exact opening, not the last job’s dimensions. No manufacturer authorization sits behind this work, and we don’t pretend otherwise. We’re independent Mr-Glass service providers who know the product line cold.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Boulder Creek
Here’s what Mr-Glass shower work typically runs in Boulder Creek, based on the scope of the project and the condition of the existing framing and waterproofing.
| Service | Price Range |
|---|---|
| Frameless Glass Shower Enclosure | $4,500 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
The spread comes down to a few things. Is the existing shower pan reusable or does it need waterproofing? Is the framing behind the pivot still sound? Does the opening match a standard Mr-Glass panel or do we need custom glass? A free estimate from us means we show up, look at the structure, and give you a written line-item scope, not a guess over the phone. Call (833) 756-5936 to schedule an exact quote for your Boulder Creek bathroom.
Serving Boulder Creek, CA — Our Local Coverage Area
We’re based in the Boulder Creek area and know this community well, and we also offer Mr-Glass service in Brookdale. Use the map below to see our full service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Boulder Creek
Yes. We pre-measure at the house, then stage materials at a safe point on Highway 9 or schedule a smaller delivery vehicle that can handle your drive, whether that’s in Boulder Creek or for Mr-Glass repair in Ben Lomond. We’ve done this enough times that planning the material route is part of the estimate, not an afterthought.
Most of the time it’s fixed. If the glass is intact and the issue is a pulled pivot or failed hinge, we sister the framing, re-anchor the hardware with stainless fasteners, and re-hang the door. Replacement only makes sense when the glass is chipped at the hinge cutout or the surrounding framing is too far gone. Call (833) 756-5936 and we’ll tell you which camp you’re in.
Chapter 7A WUI requirements focus on exterior envelope and ember-resistant assemblies, so a shower enclosure itself isn’t directly regulated. But the remodel work around it can be. If we’re opening walls or doing a tub-to-shower conversion, we check for existing water damage in the framing and verify the ventilation is doing its job. A bathroom that traps moisture behind the tile in Boulder Creek—or up in Mr-Glass repair in Lompico—is a bathroom that’s rotting from the inside.
Whenever the part is still available, yes. OEM hinges, pivots, seals, and sweeps preserve the original fit and any remaining warranty. For older Mr-Glass models where OEM parts are discontinued, we use quality aftermarket hardware and tell you that upfront before anything is installed.
Replacing just the glass generally runs between $3,000 and $8,500 depending on panel size, glass thickness, and whether the hardware can be reused. Custom sizing for an out-of-square Boulder Creek opening adds a bit. Call (833) 756-5936 for a free in-home estimate with exact numbers.
Service Areas Near Boulder Creek
We serve Boulder Creek and the surrounding mountain and foothill communities. If you’re in Felton, Ben Lomond, Brookdale, or up or down Highway 9 toward Saratoga, our crews know the roads and the houses. For work on the other side of the valley, see our Mr-Glass service in Monte Sereno page, and for the east foothills, read about Mr-Glass service in Alum Rock.
Book Your Mr-Glass Service in Boulder Creek Today
If your Mr-Glass enclosure is sagging, leaking, or just hard to open, don’t wait until the glass cracks. Call (833) 756-5936 to schedule a free estimate with the team that knows Boulder Creek’s houses and Mr-Glass hardware equally well.
Written by Nolan Driscoll, Owner at Iron Beam Contractors, serving Boulder Creek, Mr-Glass in Felton, and the Santa Cruz Mountains with shower enclosure repair and installation.